Abstract:Improved switching characteristics were obtained from high-κ oxides AlOx, GdOx, HfOx, and TaOx in IrOx/high-κx/W structures because of a layer that formed at the IrOx/high-κx interface under external positive bias. The surface roughness and morphology of the bottom electrode in these devices were observed by atomic force microscopy. Device size was investigated using high-resolution transmission electron microscopy. More than 100 repeatable consecutive switching cycles were observed for positive-formatted memory devices compared with that of the negative-formatted devices (only five unstable cycles) because it contained an electrically formed interfacial layer that controlled 'SET/RESET' current overshoot. This phenomenon was independent of the switching material in the device. The electrically formed oxygen-rich interfacial layer at the IrOx/high-κx interface improved switching in both via-hole and cross-point structures. The switching mechanism was attributed to filamentary conduction and oxygen ion migration. Using the positive-formatted design approach, cross-point memory in an IrOx/AlOx/W structure was fabricated. This cross-point memory exhibited forming-free, uniform switching for >1,000 consecutive dc cycles with a small voltage/current operation of ±2 V/200 μA and high yield of >95% switchable with a large resistance ratio of >100. These properties make this cross-point memory particularly promising for high-density applications. Furthermore, this memory device also showed multilevel capability with a switching current as low as 10 μA and a RESET current of 137 μA, good pulse read endurance of each level (>105 cycles), and data retention of >104 s at a low current compliance of 50 μA at 85°C. Our improvement of the switching characteristics of this resistive memory device will aid in the design of memory stacks for practical applications.

Highly uniform and reliable resistance switching properties in bilayer WOx/NbOx RRAM devices

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Improvement of Resistive Switching Uniformity by Introducing A Thin Nbox Interface Layer

Highly uniform bipolar resistive switching with Al2}O 3 buffer layer in robust NbAlO-based RRAM

High-density WOx-based RRAM with a W-doped AlOx insertion layer

Study of the Bipolar Resistive‐switching Behaviors in Pt/GdOx/TaNx Structure for RRAM Application

Performance Enhancement of Nonvolatile Resistive Switching Memory device Made from WO<sub>X</sub>/ZnO Bilayer Structure

Uniform, Fast, and Reliable LixSiOy-Based Resistive Switching Memory

Complementary Resistive Switching in Niobium Oxide-Based Resistive Memory Devices

Enhanced Resistive Switching Performance and Structural Evolution of NiO/Nb2O5-x Bilayer Memristive Device

Oxide-based RRAM: Unified microscopic principle for both unipolar and bipolar switching

Resisitive Switching Variability Study on 1T1R AlOx/WOx-based RRAM Array

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Optimization of the Forming Process of HfOx-Based RRAM to Achieve Bidirectional Forming and Enhanced Switching Performance by Inserting an Oxygen-Vacancy-Rich Layer

A CMOS Compatible WOx RRAM with Optimized Switching Operations

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Resistive Switching Behavior of Solution-Processed AlOx, based RRAM with Ni and TiN Top Electrode at Low Annealing Temperatures

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

Diode-less Bilayer Oxide (wox–nbox) Device for Cross-Point Resistive Memory Applications

Bipolar Resistance Switching in the Pt/WOx/W Nonvolatile Memory Devices

Impact of electrically formed interfacial layer and improved memory characteristics of IrOx/high-κx/W structures containing AlOx, GdOx, HfOx, and TaOx switching materials