Abstract:The common nonpolar switching behavior of binary oxide-based resistive random access memory devices (RRAMs) has several drawbacks in future application, such as the requirements for a high forming voltage, a large reset current, and an additional access device to settle the sneak-path issue. Herein, we propose the tuning of the switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer, and a case study on Ta2O5-Ta systems is provided. The devices are designed to be Pt/Ta2O5(5 - x/2)/Ta(x)/Ta2O5(5 - x/2)/Pt with x = 0, 2, or 4 nm. The reference devices without the Ta nanolayer exhibit an expected nonpolar switching behavior with a high forming voltage of similar to-4.5 V and a large reset current of >10 mA. In contrast, a self-compliance bipolar switching behavior with a low forming voltage of similar to-2 V and a small reset current of <1 mA is observed after inserting a 2 nm Ta nanolayer. When the Ta nanolayer is increased to 4 nm, a complementary resistive switching (CRS) behavior is found, which can effectively settle the sneak-path issue. The appearance of CRS behavior suggests that a thin Ta nanolayer of 4 nm is robust enough to act as an inner electrode. Besides, the behind switching mechanisms are thoroughly discussed with the help of a transmission electron microscope and temperature-dependent electrical measurements. All these results demonstrate the feasibility of tuning switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer and might help to advance the commercialization of binary oxide-based RRAMs.

Study of the Bipolar Resistive‐switching Behaviors in Pt/GdOx/TaNx Structure for RRAM Application

Study of the Resistive Switching Characteristics and Mechanisms of Pt/CeOx/TiN Structure for RRAM Applications

The Improved Resistive Switching Properties of TaOx-based RRAM Devices by Using WNx As Bottom Electrode

Resistive Switching Characteristics of Pt/TaOx/HfNx Structure and Its Performance Improvement

Electrode-Dependent Resistive Switching Characteristics of Sr(Ti,Sn)O-3 Thin Films

HfOx Bipolar Resistive Memory with Robust Endurance Using ZrNx As Buttom Electrode

In-depth Understanding of Physical Mechanism of the Gradual Switching in AlOxNy-based RRAM As Memory and Synapse Device

Investigation of Resistive Switching in Bipolar Taox-Based Resistive Random Access Memory

Resistive Switching Characteristics of Resistive Random Access Memory Based on a Ba X Sr 1-X TiO 3 Thin Film Grown by a Hydrothermal Method

Unipolar Resistive Switching and Mechanism in Gd-doped-TiO2-based Resistive Switching Memory Devices

Tuning The Switching Behavior Of Binary Oxide-Based Resistive Memory Devices By Inserting An Ultra-Thin Chemically Active Metal Nanolayer: A Case Study On The Ta2o5-Ta System

Bipolar Resistive Switching Characteristics of HfO2/TiO2/HfO2 Trilayer-Structure RRAM Devices on Pt and TiN-Coated Substrates Fabricated by Atomic Layer Deposition

Switching Behaviors of TiN/HfOx/Pt Based RRAM

A Unified Physical Model of Switching Behavior in Oxide-Based RRAM

Thin TiOx Layer As a Voltage Divider Layer Located at the Quasi-Ohmic Junction in the Pt/Ta2O5/Ta Resistance Switching Memory.

High Performance Low Power Multilevel Oxide Based RRAM Devices Based on TiOxNy/Ga2O3 Hybrid Structure

Anatomy of Resistive Switching Behavior in Titanium Oxide Based RRAM Device

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

EFFECTS OFTiOxINTERLAYER ON RESISTANCE SWITCHING OFPt/TiOx/ZnO/n+-SiSTRUCTURES

Electrode-Induced Digital-To-Analog Resistive Switching in Taox-Based Rram Devices