Abstract:To better understand the passive torsional motion and to quantify the torsional motion of an insect, we developed a new scanning beam method that can measure with high resolution the variation in both the torsion angle and shape of an insect wing during pure Rapping motion. This new method is based on the conventional principle used in a laser beam displacement probe with a position detector, but introduces the use of an acousto-optic deflector, which enables us to pass the scanning laser beam over the wing. Therefore, by measuring the relative displacement between the beam spots on the wing, we can determine the passive variation in both the torsion angle and shape of an insect wing with high resolution. According to the waveform supplied to the acousto-optic deflector we define both a two-point scanning method, which we use to measure the variation in torsion angle, and a multipoint scanning method, which we use to measure the variation in shape. We apply these methods to a dragonfly wing at different flapping frequencies, and compare the results with those determined using a high-speed video camera. The good agreement between the two methods shows that the scanning beam method can be effectively applied in the field of biomechanics to study the torsion angle variation and shape variation of an insect wing. (C) 1996 Society of Photo-Optical instrumentation Engineers.

Two-Colour Compensation Method for Measuring Unsteady Vertical Force of an Insect in A Wind Tunnel

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

High‐resolution Method for Measuring the Torsional Deformation of a Dragonfly Wing by Combining a Displacement Probe with an Acousto‐optic Deflector

Orthogonal-polarization compensation method for measuring unsteady vertical force of a bumblebee in a wind tunnel

A TEMPERATURE-GRADIENT CORRECTION METHOD FOR FILM COOLING EFFECTIVENESS MEASUREMENT USING ENDOSCOPE-BASED PSP TECHNIQUE

Time-sharing Collimation Method for Measuring the Beating Force of an Insect

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Simultaneous Measurement of the Shape and Thickness of a Dragonfly Wing

Angle-compensation Sensor for Measuring the Shape of a Dragonfly Wing

A Measurement Technique On The Hydrodynamic Force On The Free Surface-Piercing Cylinder At A Yawed Angle

Two-dimensional, Noncontact Measurement of the Natural Frequencies of Dragonfly Wings Using a Quadrant Position Sensor

Scanning Beam Collimation Method for Measuring Dynamic Angle Variations Using an Acousto‐optic Deflector

Measurement of the Flapping Angle and Torsional Angle of a Dragonfly Wing Using Fringe Projection Method

Measurement on Camber Deformation of Wings of Free-flying Dragonflies and Beating-flying Dragonflies

A New Method for Measuring the Thickness and Shape of A Thin Film Simultaneously by Combining Interferometry and Laser Triangulation

Afm with the Slope Compensation Technique for High-Speed Precision Measurement of Micro-Structured Surfaces

Measurement Errors and Correction of the UAT-2 Ultrasonic Anemometer

Measuring the Body Position, Attitude and Wing Deformation of a Free-Flight Dragonfly by Combining a Comb Fringe Pattern with Sign Points on the Wing

A Vibration Compensation Method Based on White-light Wavelength Scanning Interferometry

An angle-of-attack correction method for a 2-D miniature differential pressure solid-state anemometer

Measuring Wing Kinematics, Flight Trajectory and Body Attitude During Forward Flight and Turning Maneuvers in Dragonflies