Abstract:C/C-ZrC-SiC composites were produced by the joint processes of chemical liquid-vapor deposition (CLVD) and precursor infiltration and pyrolysis (PIP), and the effects of deposition period in CLVD process on the preparation, microstructure and anti-ablation property were studied. The results displayed the non-woven layers of the composites was preferred to be densified in CLVD method, but the subsequent PIP process could fill the pores of the fiber webs. Thus the joint technologies reduced the porosity of the composites and improved the content of ceramics. Meanwhile, the insufficient deposition in CLVD process led to large amounts of defects, which were not densified fully in the following PIP. However, the excessive deposition of CLVD filled the pores remarkably, so the channels for precursor infiltration in the subsequent PIP were reduced. When the deposition period was 8 h, the sample C8P9 had a low porosity, high ceramics content and uniform distribution, which was responsible for its outstanding ablation resistance. After ablation for 60 s, sample C8P9 was damaged slightly, and its mass and linear ablation rate was 1.22 x 10(-3) g/s and 1.07 x 10(-3) mm/s. The ablation surface was divided into four regions, and the different oxide coatings were generated on these regions. These coatings could provide effective protection for the composites, which made a significant contribution to improve the ablation resistance.

Mechanical Property, Oxidation and Ablation Resistance of C/C–ZrB2–ZrC–SiC Composite Fabricated by Polymer Infiltration and Pyrolysis with Preform of Cf/ZrB2

Preparation and properties of C/C-ZrC-SiC-ZrB2 composites via polymer infiltration and pyrolysis

Preparation and Properties of C/C−ZrB2−SiC Composites by High-Solid-loading Slurry Impregnation and Polymer Infiltration and Pyrolysis (PIP)

Enhanced Anti-Ablation Performance of Carbon/carbon Composites Modified with ZrC-SiC

Improved Ablation Resistance of C/Sic-Zrb2 Composites Via Polymer Precursor Impregnation and Pyrolysis

Microstructure and Ablation Property of C/C-ZrC-SiC Composites Fabricated by Chemical Liquid-Vapor Deposition Combined with Precursor Infiltration and Pyrolysis

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

Ablative and Mechanical Properties of C/C–ZrC Composites Prepared by Precursor Infiltration and Pyrolysis Process

Mechanical Properties and Ablation Behavior of C/C-ZrC and C/C-ZrC-SiC Composites Prepared by Precursor Infiltration and Pyrolysis Combined with Chemical Vapor Infiltration

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Effects of Oxidizing Species on Ablation Behavior of C/C-Zrb2-Zrc-Sic Composites Prepared by Precursor Infiltration and Pyrolysis

Mechanical, Oxidation and Ablation Properties of C/(C-SiC)CVI-(ZrC-SiC)PIP Composites

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

Oxidation And Ablation Resistance Of C-F/Zrc-Sic Ultra-High Temperature Composites

Ablation Properties of C/C-ZrC-SiC Composites

Ablation Behavior of a C/C-ZrC-SiC Composite Based on High-Solid-loading Slurry Impregnation under Oxyacetylene Torch

Ablation Properties of C/C-Zrc-Sic Composites by the Precursor Infiltration Pyrolysis

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Effects of Porous C/C Density on the Densification Behavior and Ablation Property of C/C–ZrC–SiC Composites

Fabrication and ablation property of carbon/carbon composites with novel SiC–ZrB2 coating