Abstract:This study investigates the initial yield characteristics of closed-cell aluminium foam (Alporas) in multiaxial stress states using experimental and numerical approaches. The mechanical responses of foams with two relative densities (11.7% and 17.2%) are presented in uniaxial compression, uniaxial tension, biaxial compression, biaxial tension and combined tension-compression loading conditions. Cubic and dog-bone specimens are fabricated for uniaxial compression and tension tests respectively. A Modified Maltese Cross Specimen (MMCS) geometry is custom designed for testing closed-cell foams in biaxial stress states. The experimental investigations reveal a consistently stiffer response of closed-cell foams in tensile dominated stress states. This is attributed to the stretching mode of deformation observed in the cell walls in tensile loading conditions, in contrast to the bending/buckling dominant deformation in compressive loading conditions. To complement the experimental data, a wide range of multiaxial stress states is simulated using irregular 3D Voronoi models. An initial yield surface normalized with respect to the uniaxial compressive yield strengths is constructed in the mean-effective stress space using both experimental and numerical data. The normalized initial yield surfaces appear considerably shifted towards the positive mean stress axis. An yield criterion for closed-cell aluminium foams that adequately captures this asymmetric nature of the yield surface about the effective stress axis is proposed, which requires only uniaxial compressive yield strength as a parameter. An empirical relation function estimating the uniaxial compressive yield strength based on the density of the foam material is proposed to facilitate direct application of the yield criterion in early stages of the design.

Spherical indentation of closed-cell aluminum foams: An empirical force–depth relation

Effect of Temperature on the Indentation Behavior of Closed-Cell Aluminum Foam

An Experimental Study of the Indentation Behaviour of Al Foam

Indentation Behavior of A Closed-Cell Aluminum Foam at Elevated Temperatures

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Numerical Simulation for Quasi-Static Indentation Response of Al Foam

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Deformation mechanism of closed-cell aluminum foam under uniaxial compression

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Estimation of Mechanical Properties of Aluminum Alloy Based on Indentation Curve and Projection Area of Contact Zone

Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading

NUMERICAL SIMULATION FOR CONE INDENTATION OF METALLIC FOAMS AND THE REVERSE ANALYSIS

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Localized Indentation of Sandwich Panels with Metallic Foam Core: Analytical Models for Two Types of Indenters

Dynamic mechanical properties of aluminum alloy foams

Initial Yield Behaviour of Closed-Cell Aluminium Foams in Biaxial Loading