Abstract:The impact of a rigid body (protected structure) together with cushion material (cellular metal foam) on hard ground from a fixed height was investigated. An analytical one-degree-of-freedom colliding model (ODF-CM) was established to analyze the protection ability and energy absorption by the foam under low velocity impact conditions. For validation, drop hammer experiments were carried out for high porosity closed-cell aluminum foam specimens subjected to low velocity impact loading. The dynamic deformation behavior of the specimen was observed and the velocity attenuation of the drop hammer was measured. The results demonstrated that the aluminum foam had excellent energy absorption capabilities, with its dynamic compressive behavior similar to that obtained under quasi-static loading conditions. Finite element method (FEM) was subsequently employed to obtain stress distributions in the foam specimen. As the propagating period of stress in the specimen was far less than the duration of attenuation, the evolution of the stress was similar to that under quasi-static loading conditions and no obvious stress wave effect was observed, which agreed with the experimental observation. Finally, the predicted velocity attenuation by the ODF-CM was compared with both the experimental measurements and FEM simulation, and good agreements were achieved when the stress distribution was considered to be uniform and the “quasi-static” compressive properties are employed.

Effect of Temperature on the Indentation Behavior of Closed-Cell Aluminum Foam

Indentation Behavior of A Closed-Cell Aluminum Foam at Elevated Temperatures

An Experimental Study of the Indentation Behaviour of Al Foam

Spherical indentation of closed-cell aluminum foams: An empirical force–depth relation

Deformation and Perforation of Sandwich Panels with Aluminum-Foam Core at Elevated Temperatures

Indentation of Composite Sandwich Panels with Aluminum Foam Core: an Experimental Parametric Study

High temperature and mesostructure effect on aluminum foam compression responses

Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading

Deformation mechanism of closed-cell aluminum foam under uniaxial compression

Temperature Effects on the Mechanical Behavior of Aluminum Foam under Dynamic Loading

Investigation of the Indentation Resistance of Aluminum Foam Sandwich Panels with Metallurgical Bonding Interfaces under Low-Velocity Impact

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

Indentation Behavior Of Sandwich Structures With Metallic Foam Core

Cell-size effect on mechanical properties of aluminum foams

Compressive Behavior and Deformation Mechanism of Aluminum Foam under Different Temperature

Indentation of Metal Foam Core Sandwich Beams: Experimental and Theoretical Investigations

Effects of cell wall property on compressive performance of aluminum foams

Localized Indentation of Sandwich Panels with Metallic Foam Core: Analytical Models for Two Types of Indenters

Effect of Cell Diameter Variations on the Mechanical Behavior of Aluminum Foams: Experiments and Modeling

Low Strain Rate Compressive Behavior of High Porosity Closed-Cell Aluminum Foams

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure