Abstract:The indentation of metal by a flat punch is a model system for forming processes and intimately linked with hardness testing. Here, we perform first-in-class, high-fidelity finite element (FE) simulations in an arbitrary Lagrangian–Eulerian (ALE) framework to study the deformation field in deep punch indentation of annealed copper. The use of ALE allows indentation depth to punch width ratios as high as 1.6, while the use of Lagrangian tracer particles reveals pathlines of material transport. Field quantities such as the plastic strain, strain rate and velocity are obtained at high resolution. A low-strain, dead-metal zone (DMZ) that is stationary with respect to the indenter forms immediately below the punch. Crucially, it is found that DMZs are unavoidable in deep punch indentation, forming at the outset and irrespective of the coefficient of friction. However, the area of this zone shrinks as the indentation progresses at a rate that is inversely related to the friction. The simulations thus explain why Prandtl’s view of punch indentation, which incorporates DMZs, is physically more accurate than Hill’s view. The computations successfully reproduce the strain field inhomogeneity seen in recent in situ imaging experiments. While DMZ formation is impervious to the hardening model used, Zerilli–Armstrong hardening provides more accurate indentation force estimates than Johnson–Cook hardening. Lastly, the residual impression and factors affecting its shape are studied. The sides of impressed metal are never vertical, but at an inclination to it. Methods to modify such features, of potential interest in metal forming, are discussed briefly.

Indentation of A Flat Circular Punch with Uniform Heat Flux at Its Base into Transversely Isotropic Magneto-Electro-Thermo-Elastic Half Space

Indentation Of A Transversely Isotropic Thermoporoelastic Half-Space By A Rigid Circular Cylindrical Punch

3D Coupled Field in A Transversely Isotropic Magneto-Electro-Elastic Half Space Punched by an Elliptic Indenter

Inclined Circular Flat Punch on A Transversely Isotropic Piezoelectric Half-Space

Indentation on a transversely isotropic half-space of multiferroic composite medium with a circular contact region

The elastic and electric fields for three-dimensional contact for transversely isotropic piezoelectric materials

Indentation of a Compressible Soft Electroactive Half-Space: Some Theoretical Aspects

Fundamental Solutions to Contact Problems of a Magneto-Electro-elastic Half-Space Indented by a Semi-Infinite Punch

Theory of indentation on multiferroic composite materials

The Elasto-Electric Field for a Rigid Conical Punch on a Transversely Isotropic Piezoelectric Half-Space

Numerical study of contacts between a flat-ended punch and a half-space embedded with inhomogeneities

A Penny-Shaped Crack in an Infinite Linear Transversely Isotropic Medium Subjected to Uniform Anti-Symmetric Heat Flux: Closed-form Solution

The Use Of Flat Punch Indentation To Determine The Viscoelastic Properties In The Time And Frequency Domains Of A Soft Layer Bonded To A Rigid Substrate

Indentation Responses of Piezoelectric Films

Mechanics of Indentation for Piezoelectric Thin Films on Elastic Substrate

Deformation field in deep flat punch indentation and the persistence of dead-metal zones

Indentation Responses of Piezoelectric Layered Half-Space

Indentation on Two-Dimensional Hexagonal Quasicrystals

A Penny-Shaped Crack in Transversely Isotropic Magneto-Electro-thermo-elastic Medium Subjected to Uniform Symmetric Heat Flux

Indentation Behavior of a Semi-Infinite Piezoelectric Semiconductor under a Rigid Flat-Ended Cylindrical Indenter

Indentation of A Square Elastomeric Thin Film by A Flat-Ended Cylindrical Punch in the Presence of Long-Range Intersurface Forces