Abstract:The deformation of closed-cell aluminum foam (CAF) in different solid–liquid–gas coexisting state was studied in this paper. The results showed that the most suitable temperature of the CAF deformation was about 635 °C, which made the CAF have maximum deformation, but its characteristic parameters changed slightly. Moreover, the multi-grain cell wall and small size cell were helpful to the CAF deformation in the solid–liquid–gas coexisting state. When the CAF deformed at 635 °C, the inter-granular solidification microstructure and part of the primary α-Al grain were melted into liquid. The fixed or inter-locked primary α-Al grain was released and changed into the distributed discretely near-spherical grain, making the cell wall have good thixotropy. At the same time, the gas pressure in the cell was recovered to the foaming stage, so the gas pressure could be close to the flow stress of cell wall. During the CAF deformation in the solid–liquid–gas coexisting state, the cell wall deformed in thixotropic under the supporting and coordinating of the gas pressure in the cell, meanwhile, the cell was moved following the cell wall deformation. Therefore, the CAF deformation was affected by the types of the cell walls and the cell size. Graphic Abstract In this paper, the mold forming process was used to study the influence of temperature on deformation of the closed-cell aluminum foam (CAF) that in solid–liquid–gas coexisting state. When the CAF was deformed in solid–liquid–gas coexisting state who has strong deformation capacity, moreover, whose characteristic parameters are largely unchanged. However, shape forming of the closed cell aluminum foam only could be realized in specific solid–liquid–gas coexisting state, which was mainly related to the deformation temperature.

Indentation Behavior of A Closed-Cell Aluminum Foam at Elevated Temperatures

Impact Properties of Uniaxially Thermoformed Auxetic Foams

High temperature and mesostructure effect on aluminum foam compression responses

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Investigation of the Indentation Resistance of Aluminum Foam Sandwich Panels with Metallurgical Bonding Interfaces under Low-Velocity Impact

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Compression performances of integral-forming aluminum foam sandwich

Effects of cell wall property on compressive performance of aluminum foams

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

The indentation responses of composite Y‐type cores sandwich structure under various temperatures

Mode I Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Study on Deformation of Closed-Cell Aluminum Foam in Different Solid–Liquid–Gas Coexisting State

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Three-point bending performances of integral-forming aluminum foam sandwich

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study