Abstract:Barium acetate, Zirconium nitrate and Calcium nitrate, Tetrabutyl titanate and Ce2O3 were used as the starting materials, the 0.68 BaZr0.2Ti0.8O3-0.32 Ba0.7Ca0.3TiO3 ceramics are prepared by using sol-gel method, and effects of Ce2O3 content on structure, dielectric and piezoelectric properties of 0.68 BaZr0.2Ti0.8O3-0.32 Ba0.7Ca0.3TiO3 ceramics are investigated. The phase composition was detected by using X-ray diffraction characterization, and the micrographs were observed by field emission scanning electron microscopy. The results show that Ce3+ doped 0.68 BaZr0.2Ti0.8O3-0.32 Ba0.7Ca0.3TiO3 ceramics have perovskite structure, when the Ce3+ doping amount is 0.006 mol%, the density is the highest, the grain size is the most uniform, and the porosity is the smallest. With the increase of Ce3+ doping content, the dielectric constant and piezoelectric constant of the sample first decreases, then increases and then decreases, meanwhile the dielectric loss first decreases and then increases. Very coincidentally, when the Ce3+ doping amount is 0.04 mol%, the dielectric constant, piezoelectric constant and planar electromechanical coupling factor k(p) are the highest. So the dielectric and piezoelectric properties of 0.68 BaZr0.2Ti0.8O3-0.32 Ba0.7Ca0.3TiO3 ceramics are optimized when the Ce3+ doping amount is 0.04 mol%.

In Situ Formation of Ce-TZP/Ba Hexaaluminate Composites.

Microstructure Development and Mechanical Properties of Ce-TZP/La- Β-Alumina Composites

In‐Situ Formation of Ce‐TZP‐M‐Type Hexaferrite Composites

Co2+‐Substitution Effect in Ce‐TZP/La M‐type Hexaferrite Composites

PREPARATlON AND SINTERING BEHAVIOR OF Al2O3/10Ce-TZP COMPOSITES FOR ARTIFICIAL JOINT

Novel Procssing Of In-Situ Composites; Strengthening, Toughening And Crack Sensing

PREPARATION AND MICROSTRUCTURE OF IN SITU REINFORCED Ce-TZP MATRIX COMPOSITES

Synthesis of Al3+-Substituted La M-Type Hexaferrite for in Situ Ceramic Composite Processing

Effects of CeO2 additive on the microstructure and mechanical properties of in situ TiB2/Al composite

Fabrication, microstructure and mechanical properties of in situ Al2O3 platelets reinforced Ce-TZP composites

Microstructure and tensile properties of in situ synthesized (TiC + TiB + Nd2O3)/Ti-alloy composites at elevated temperature

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

Elevated temperature microstructural stability in Al-7Cu-0.5Mn-0.2Zr alloys through Ce addition: Enhanced coherent interfacial stability of cu-rich θ'/α-Al interface

Microstructure and Mechanical Properties of Ti44Al6Nb Alloys with Different Cerium Contents

Synthesis and Magneto‐mechanical Properties of Ce‐TZP/La M‐Type Hexaferrite Composite

Preparation of Sr2CeZrO6 Refractory and Its Interaction with TiAl Alloy

Effect Of Different Ce2o3 On The Structure And Properties Of Bzt-Ct Ceramics

In Situ Processing of Y-TZP/M-Type Hexaferrite Composite.

Grain size dependence of the microstructures and functional properties of (Ba0.85 Ca0.15–x Cex) (Zr0.1 Ti0.9) O3 lead-free piezoelectric ceramics

Electrical Properties and Temperature Stability of CeO2 and MnCO3 Co-Doped Pb0.95Sr0.05(Mn1/3Nb2/3)0.05(Zr0.48Ti0.52)0.95O3 Piezoceramics with High Mechanical Quality Factor

Fabrication, Microstructure and Mechanical Properties of In Situ Al<sub>2</sub>O<sub>3</sub> Platelets Reinforced Ce-TZP Composites