Abstract:During liquid-solid transformation, bulk mass and thermal diffusion, along with the evolved interfacial latent heat, work in tandem to generate interfacial thermodynamic and kinetic forces, the interplay of which decides the solidification velocity and consequently the solidified phase attributes. Hence, access to interface dynamics information in dependence of bulk transfer processes is pivotal to tailor the desired quantity of solid phases of unique compositions. It finds particular application for engineering concentrated Lithium (Li) phases out of Li-ion battery slags, thus generating a high value-added product from a conventional waste process stream. However, considerable challenge exists to predict the impact of the diverse external cooling rates on the evolving internal transfer processes and thus tuning solidification routes for achieving phases of interest. Hence, in this work, a thermodynamically consistent nonequilibrium model, by considering spatiotemporal temperature and concentration fields, is developed and applied to study solidification of Li2SiO3 from a Li2O-SiO2 melt that constitutes an important subsystem of the Li containing battery-recycling slags. The approach treats the sharp solid/liquid interface as a moving heat source. In the presence of different heat extraction profiles, it evaluates the spatial temperature heterogeneity and its implicit correlation to internal material fluxes resulting from maximization of dissipation and consequently the interrelation to interface velocities. Model calculations revealed that irrespective of the external cooling rate, for an initial short time duration, the magnitude of which increased with decreasing cooling rates, the interface velocities show a reducing trajectory directly relatable to the reducing thermodynamic forces due to localized interfacial temperature rise from the generated latent heat of fusion from the initial solidification. This is followed by a thermodynamically controlled regime, whereby for each cooling rate, the interface velocities increase until a maxima, the magnitude of which decreases with decreasing cooling rates. Finally, the interface propagation speeds decrease as controlled by the kinetic regime.

Transition Between Two Steady States of Unidirectional Solidification of Lanthanum Modified Al–Si Eutectic

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Response dynamics of the lamellar spacing for Al-Si eutectic during directional solidification

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy During Annealing

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys

Synergistic Effect of Lanthanum and Melt Purification on the Microstructure of Hypereutectic Al–Si Alloy

Critical splitting of the solidifying interface-geometrical model of spacing selection during directional solidification of lamellar eutectics

Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution

In-situ observations of solidification process of Fe–Al–Ta eutectic alloy

Modification of Eutectic Si in Al–Si Alloys with Eu Addition

Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy

Influence of lanthanum additive on phase transition, microstructure and lithium ionic conductivity of beta-eucryptite

Control of Interface Migration in Nonequilibrium Crystallization of Li2SiO3 from Li2O-SiO2 Melt by Spatiotemporal Temperature and Concentration Fields

Microstructural transition in monotectic alloys: A phase-field study

Effects of Cooling Rates on the Solidification Process of Al-Si-Mg Alloy

Phase selection and microstructure evolution within eutectic Ti-Si alloy solidified at containerless state

Effects of Composition and Growth Rate on the Microstructure Transformation of Β-Rods/lamellae/α-rods in Directionally Solidified Mg-Li Alloy

Effect of Si and Holding Time on Ti2Al20La Phase in Al-Ti-La Intermediate Alloy

Behavior and Mechanisms of Deformation in Intermetallic Compound Al66Mn 9Ti25+la