Abstract:The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer, which is beneficial to shape and property control in wire arc additive manufacturing. In this paper, with the wire feeding speed as a characteristic quantity, the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio (under the condition of a constant total current), the wire current/main current and the position of the wire in the arc axial direction. The results showed that under the premise that the total current remains unchanged (100 A), as the current separation ratio increased, the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power, the first melting mass range remained constant; the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed, and the second melting mass range was expanded. When the wire current increased, the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount; however, when the main current increased, the plasma arc power was the only factor causing the increase in the wire melting amount. The average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc power. The minimum melting amount was not affected by the wire-torch distance under any current separation ratio tested. When the current separation ratio increased and reached a threshold, the middle melting amount remained constant with increasing wire-torch distance. When the current separation ratio continued to increase and reached the next threshold, the maximum melting amount remained constant with the increasing wire-torch distance. The effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation ratio. Through this study, the decoupling mechanism and ability of this innovative arc heat source is more clearly.

Analysis of arc interference and welding stability in twin wire GMA welding

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

Arc characteristic in aluminum alloy double-wire variable polarity double base pulsed gas metal arc welding

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

Effect of current configuration on weld properties and microstructure in synchronised twin-wire pulsed MAG welding

Investigation of Arc Stability in Wire Arc Additive Manufacturing of 2319 Aluminum Alloy

Stability Analysis of GMAW Based on Multi-Scale Entropy and Genetic Optimized Support Vector Machine

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Thick-wire swing arc narrow gap GMA welding assisted by pre-embedding cold wires

Experimental Study on Wire Melting Control Ability of Twin-Body Plasma Arc

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Dynamic Metal Transfer Behavior in Double-Wire DP-GMAW of Aluminum Alloy Under Different Pulse Phases

Effects of Arc Length Adjustment on Weld Bead Formation and Droplet Transfer in Pulsed GMAW Based on Datum Current Time

Comparative Study of Droplet Transfer Modes on Appearance, Microstructure, and Mechanical Properties of Weld During Pulsed GMAW

Forming characteristic analysis in twin tungsten electrode – wire electrode indirect arc based additive manufacturing

Role of material properties on metal transfer dynamics in gas metal arc welding

Stability Analysis and Control of Welding Current for Automatic Rail Narrow-gap Arc Welding System

Experimental Investigation of Integrated Circular Triple-Wire Pulse GMAW of Q960E High-Strength Steel for Construction Machinery

Effect of phase shift on arc interference and weld bead formation in aluminum alloy tandem GMAW with a median pulsed waveform

Welding Currents Filtering of Compulsively Short Circuiting Transfer in Rotational Arc MAG Welding

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods