Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Theoretical consideration of Solid Oxide Electrolyzer Cell with zirconia-based electrolyte operated under extreme polarization or with low supply of feedstock chemicals

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Theoretical Aspects on Doped-Zirconia for Solid Oxide Fuel Cells: from Structure to Conductivity

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Polarization Behavior of High Temperature Solid Oxide Electrolysis Cells (SOEC)

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Performance evolution analysis of solid oxide electrolysis cells operating at high current densities

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells

A Solid Oxide Electrolysis Cell (SOEC) with High Current Density and Energy Efficiency for Hydrogen Production

Solid Oxide Fuel Cell Porous Cathode Micro Modeling and Performance Prediction

Benchmarking Electrolytes for the Solid Oxide Electrolyzer Using a Finite Element Model

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Electrode Performance and Analysis of Reversible Solid Oxide Fuel Cells with Proton Conducting Electrolyte of BaCe0.5Zr0.3Y0.2O3−δ

The oxygen partial pressure in solid oxide electrolysis cells with two layer electrolytes

Solid Oxide Electrolyzer Cell Modeling: A Review

Electrical properties of CeO2-Y2O3 electrolyte SOFCs

Microstructural Degradation of Ni/YSZ Electrodes in Solid Oxide Electrolysis Cells under High Current

A polarization model for a solid oxide fuel cell with a mixed ionic and electronic conductor as electrolyte

Recent advances on electrolyte materials for SOFC: A review

Advances in component and operation optimization of solid oxide electrolysis cell