Abstract:Solid oxide fuel cell (SOFC) has attracted more and more attention in recent years due to its high efficiency and low pollution. However, lifetime and stability are still limitations that affect further commercial applications of the SOFC technology. Therefore, it is critical to establish an online monitoring and analysis method to study the mechanism of SOFC performance evolution. The initial performance evolution of SOFCs is more apparent and non-linear than the subsequent stages, affecting the performance calibration and trading, especially for the industrial large-size cells and stacks. In this study, a single cell with an effective area of 100 cm2 was tested in Xuzhou HuaTsing Jingkun Energy Co. Ltd. under the constant current condition with humidified H2 for 80 hours after the NiO-YSZ anode was reduced for 4 hours. During the operation, the EIS data under different DC electrical current biases (0, 20, 50, 100, 300 mA cm-2) and j-V curve were recorded at 24-hour intervals. The EIS data were decomposed by the distribution of relaxation time (DRT) method, and the evolution of each electrode process under different polarization conditions was obtained. For the first 22 hours, the voltage under galvanostatic test and the power density at 0.7 V increased. The performance improvement is mainly due to the increase of the OCV and the decrease of the anode gas diffusion as well as gas conversion resistance, which can be attributed to the further anode reduction. The long reduction time is related to the low porosity and fine granularity of the Ni-YSZ anode, which was preliminarily verified by FIB-SEM. During the next 60 hours, the voltage dropped rapidly, and the power density at 0.7 V decreased by 27%. This nonlinear degradation was mainly caused by the weakening of the charge transfer reactions at the anode and the O2 surface exchange kinetics at the cathode. With the increase of current density, the deterioration of anode reaction gradually became the dominant factor for the increase of polarization impedance.

Polarization Behavior of High Temperature Solid Oxide Electrolysis Cells (SOEC)

A novel solid oxide electrolysis cell (SOEC) to separate anodic from cathodic polarization under high electrolysis current

Polarization Characteristics of Liquid Antimony Anode with Smooth Single-Crystal Solid Oxide Electrolyte

Effects of a YSZ Porous Layer Between Electrolyte and Oxygen Electrode in Solid Oxide Electrolysis Cells on the Electrochemical Performance and Stability

Optimization of Sm0.5sr0.5coo3-Delta-Infiltrated Ysz Electrodes for Solid Oxide Fuel Cell/Electrolysis Cell

An Efficient Symmetrical Solid Oxide Electrolysis Cell with LSFM-based Electrodes for Direct Electrolysis of Pure CO2

Performance evolution analysis of solid oxide electrolysis cells operating at high current densities

Self-assembled cathode induced by polarization for high-performance solid oxide fuel cell

Performance and Durability of an Anode-Supported Solid Oxide Fuel Cell with a PdO/ZrO2 Engineered (La0.8sr0.2)0.95mno3-Δ-(y2o3)0.08(zro2)0.92 Composite Cathode

A Practical Approach for Identifying Various Polarization Behaviors of Redox-Stable Electrodes in Symmetrical Solid Oxide Fuel Cells

Co-synthesized Y-stabilized Bi2O3 and Sr-substituted LaMnO3 Composite Anode for High Performance Solid Oxide Electrolysis Cell

Initial-Stage Performance Evolution of Solid Oxide Fuel Cells Based on Polarization Analysis

Electrochemical performance and microstructural characterization of solid oxide electrolysis cells

Degradation Issues in Solid Oxide Electrolysers

High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes

Effect of Electrolyte Surface Microstructure on Interfacial Polarization Resistances of Solid Oxide Fuel Cell Cathodes

Development of Lsm-Based Cathodes for Solid Oxide Fuel Cells Based on Ysz Films

Sulphur poisoning of solid oxide electrolysis cell anodes

Solid oxide electrolyzer positive electrodes with novel microstructure show unprecedented stability at high current densities

High Temperature Water Electrolysis Using Metal Supported Solid Oxide Electrolyser Cells (SOEC)

High performance and stability of nanocomposite oxygen electrode for solid oxide cells