Abstract:In this work, cathode/electrolyte interfacial energy barrier for oxygen ion transport was disclosed as a crucial factor for the electrochemical performance of solid oxide fuel cells. The cell interface formed by Nd1/2Ba1/2Co1/3Fe1/3Mn1/3O3−δ cathode and Gd0.1Ce0.9O1.95 electrolyte showed an interfacial polarization resistance reaching 69.8% of entire cathodic polarization resistance at 750°C. Our findings provide a crucial data for the design and development of high‐performance SOFCs.SummaryThe decrease in cathodic polarization resistance is crucial for the development of advanced solid oxide fuel cells (SOFCs). This can be achieved by using functional ceramic catalysts for enhancing the oxygen reduction reaction. In addition to the bulk and surface properties of the catalysts, the cathode/electrolyte interfacial energy barrier also affects the cathodic polarization resistance of SOFCs. Accordingly, in this study, cells with different interface structures were designed and tested to determine the effect of the interface on the cell performance. The cell with the cathode/electrolyte interface formed by employing Nd1/2Ba1/2Co1/3Fe1/3Mn1/3O3−δ as the cathode and Gd0.1Ce0.9O1.95 as the electrolyte exhibited an interfacial polarization resistance of 0.12 Ω cm2 at 750°C, which was 69.8% of the total cathodic polarization resistance. By comparison, the cell with the cathode/electrolyte interface formed by employing Nd1/2Ba1/2Co1/3Fe1/3Mn1/3O3−δ as the cathode and La0.8Sr0.2Ga0.8Mg0.2O3 as the electrolyte demonstrated a decreased in the cathodic polarization resistance from 0.140 to 0.088 Ω cm2 at 750°C. Therefore, different interfacial energy barriers resulted in variable oxygen anion diffusions through the cathode/electrolyte heterogeneous interface. The above‐mentioned findings can provide useful data for the design and development of high‐performance SOFCs.

A novel solid oxide electrolysis cell (SOEC) to separate anodic from cathodic polarization under high electrolysis current

Self-assembled cathode induced by polarization for high-performance solid oxide fuel cell

Polarization Behavior of High Temperature Solid Oxide Electrolysis Cells (SOEC)

Solid oxide electrolyzer positive electrodes with novel microstructure show unprecedented stability at high current densities

B-Site Sc Doping of La0.6Ca0.4Fe0.8Ni0.2O3- D As an Electrode for Solid Oxide Cells

Fabrication of anode supported solid oxide electrolysis cell with the co-tape casting technique and study on co-electrolysis characteristics

Development of Nanostructured Lanthanum Strontium Cobalt Ferrite/Gadolinian-Doped Ceria Composite Electrodes of Solid Oxide Cells Formed by In Situ Polarization

A novel electrode with multifunction and regeneration for highly efficient and stable symmetrical solid oxide cell

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Electrochemical characteristics of an La0.6Sr0.4Co0.2Fe0.8O3–La0.8Sr0.2MnO3 multi-layer composite cathode for intermediate-temperature solid oxide fuel cells

An Efficient Symmetrical Solid Oxide Electrolysis Cell with LSFM-based Electrodes for Direct Electrolysis of Pure CO2

Simple Solid Oxide Fuel Cells

Effect of Electrolyte Surface Microstructure on Interfacial Polarization Resistances of Solid Oxide Fuel Cell Cathodes

Interfacial energy barrier: A crucial factor affecting cathodic polarization resistance of solid oxide fuel cells

Cerium and ruthenium co-doped La0.7Sr0.3FeO3– as a high-efficiency electrode for symmetrical solid oxide fuel cell

A Novel Design of Anode-Supported Solid Oxide Fuel Cells with Y2o3-Doped Bi2o3, Lagao3 and La-Doped Ceo2 Trilayer Electrolyte

Symmetrical La3+-doped Sr2Fe1.5Ni0.1Mo0.4O6-δ Electrode Solid Oxide Fuel Cells for Pure CO2 Electrolysis

A Practical Approach for Identifying Various Polarization Behaviors of Redox-Stable Electrodes in Symmetrical Solid Oxide Fuel Cells

High-performance Oxygen Electrode for Reversible Solid Oxide Cells with Power Generation and Hydrogen Production at Intermediate Temperature

Optimization of Sm0.5sr0.5coo3-Delta-Infiltrated Ysz Electrodes for Solid Oxide Fuel Cell/Electrolysis Cell

Cerium and ruthenium co-doped La<sub>0.7</sub>Sr<sub>0.3</sub>FeO3- as a high-efficiency electrode for symmetrical solid oxide fuel cell