Abstract:Inspired by methods of wet fiber spinning, we introduce a process using a 3D printer to create dense carbon nanotube (CNT) fibers and extensible coils with metal-like DC specific conductivity. An extrusion-based printer with an immersed nozzle extrudes a homogeneous shear-thinning ink (with initially < 1 % CNT concentration in water) into a liquid bath of antisolvent, inducing immediate precipitation-driven solidification slightly beyond the nozzle tip. This process forms continuous fibers of CNTs with conductivity up to 3 × 10 5 S/m, exceeding that of dense graphite and approaching that of CNTs spun from similar inks in a continuous fiber spinning process (6 × 10 5 S/m). The specific conductivity is up to 1 × 10 3 S m 2 /kg, comparable with gold (2.3 × 10 3 S m 2 /kg). The printing regimes are analyzed, with consideration of the draw ratio imposed during printing. Particular focus is placed on adjusting the speed of counter-diffusion of the ink solvent and the bath liquid, which allows for tuning of fiber diameter, conductivity, and specific conductivity respectively over ranges of one, four, and five orders of magnitude. The conductivity of resulting fibers is maximized when the speed of solvent counter-diffusion is high and the radius reduction is largest. When extrusion speed is also high relative to speed of the nozzle motion, a fluid mechanical coiling instability emerges which creates filaments with periodic coils, allowing for intricate designs to be formed along a linear extrusion path. Once dried, these densely coiled structures initially maintain their shape and can subsequently undergo up to 50 % strain with under 1 % change in resistance and 170 % linear extension with 20 % increase in resistance as the coils unwind. The resulting complex coil structures have applications in lightweight circuitry and as flexible interconnects.

Fabrication and Characterization of Single-Walled Carbon Nanotube Fiber for Electronics Applications

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Fabrication of highly conductive carbon nanotube fibers for electrical application

Efficient Fabrication of High-Quality Single-Walled Carbon Nanotubes and Their Macroscopic Conductive Fibers

Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network

Wet-spinning of carbon nanotube fibers: dispersion, processing and properties

Multifunctional Macroarchitectures of Double-Walled Carbon Nanotube Fibers

Wet Twisting in Spinning for Rapid and Cost‐Effective Fabrication of Superior Carbon Nanotube Yarns

Approaching Technological Limit for Wet Pulling Technique

Carbon nanotube-copper fibers produced by electrospinning: electrical conductivity measurements

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Strain-Durable High-Conductivity Nylon-6 Fiber with 1D Nanomaterial Lamellar Cladding for Massive Production

Meter-Long Spiral Carbon Nanotube Fibers Show Ultrauniformity and Flexibility

Manufacturing of high-conductivity carbon nanotube fibers and extensible coils by immersed extrusion

Fiber and fabric solar cells by directly weaving carbon nanotube yarns with CdSe nanowire-based electrodes.

Microfabrication Of Single-Wall Carbon Nanotube One-Dimensional Unit

Novel fabrication and optoelectronic property of semiconductor filaments by optical-fiber thermal drawing

Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers.

Fabrication, Assembly, and Electrical Characterization of CuO Nanofibers

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Direct writing of half-meter long CNT based fiber for flexible electronics.