Abstract:One-dimensional (1D) carbon nanotubes (CNTs) and 2D single-atomic layer graphene have superior thermal, electrical, and mechanical properties. However, these nanomaterials exhibit poor out-of-plane properties due to the weak van der Waals interaction in the transverse direction between graphitic layers. Recent theoretical studies indicate that rationally designed 3D architectures could have desirable out-of-plane properties while maintaining in-plane properties by growing CNTs and graphene into 3D architectures with a seamless nodal junction. However, the experimental realization of seamlessly-bonded architectures remains a challenge. We developed a strategy of creating 3D graphene-CNT hollow fibers with radially aligned CNTs (RACNTs) seamlessly sheathed by a cylindrical graphene layer through a one-step chemical vapor deposition using an anodized aluminum wire template. By controlling the aluminum wire diameter and anodization time, the length of the RACNTs and diameter of the graphene hollow fiber can be tuned, enabling efficient energy conversion and storage. These fibers, with a controllable surface area, meso-/micropores, and superior electrical properties, are excellent electrode materials for all-solid-state wire-shaped supercapacitors with poly(vinyl alcohol)/H2SO4 as the electrolyte and binder, exhibiting a surface-specific capacitance of 89.4 mF/cm(2) and length-specific capacitance up to 23.9 mF/cm, - one to four times the corresponding record-high capacities reported for other fiber-like supercapacitors. Dye-sensitized solar cells, fabricated using the fiber as a counter electrode, showed a power conversion efficiency of 6.8% and outperformed their counterparts with an expensive Pt wire counter electrode by a factor of 2.5. These novel fiber-shaped graphene-RACNT energy conversion and storage devices are so flexible they can be woven into fabrics as power sources.

Fiber and fabric solar cells by directly weaving carbon nanotube yarns with CdSe nanowire-based electrodes.

All Carbon Nanotube Fiber Electrode-Based Dye-Sensitized Photovoltaic Wire

Porous, platinum nanoparticle-adsorbed carbon nanotube yarns for efficient fiber solar cells.

Wire-supported CdSe nanowire array photoelectrochemical solar cells.

Intertwined Aligned Carbon Nanotube Fiber Based Dye-Sensitized Solar Cells

Solid-state, polymer-based fiber solar cells with carbon nanotube electrodes

A Novel “energy Fiber” by Coaxially Integrating Dye-Sensitized Solar Cell and Electrochemical Capacitor

Flexible, light-weight, ultrastrong, and semiconductive carbon nanotube fibers for a highly efficient solar cell.

Winding Ultrathin, Transparent, and Electrically Conductive Carbon Nanotube Sheets into High-Performance Fiber-Shaped Dye-Sensitized Solar Cells

Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network

Polymer photovoltaic wires based on aligned carbon nanotube fibers

Photovoltaic cells based on dye-sensitisation of single-wall carbon nanotubes in a polymer matrix

Triaxial Perovskite Composite Fibers Spinning the Way to Flexible Solar Cells

Core‐Sheath Carbon Nanostructured Fibers for Efficient Wire‐Shaped Dye‐Sensitized Solar Cells

Dye-Sensitized Solar Cells with Vertically Aligned Tio2 Nanowire Arrays Grown on Carbon Fibers

Hierarchically Assembled Counter Electrode for Fiber Solar Cell Showing Record Power Conversion Efficiency

Fabrication and Characterization of Single-Walled Carbon Nanotube Fiber for Electronics Applications

Carbon Nanostructured Fibers As Counter Electrodes in Wire-Shaped Dye-Sensitized Solar Cells

Rationally Designed Graphene-Nanotube 3D Architectures with a Seamless Nodal Junction for Efficient Energy Conversion and Storage.

A novel fabrication of a well distributed and aligned carbon nanotube film electrode for dye-sensitized solar cells

Carbon nanotube and CdSe nanobelt Schottky junction solar cells.