Abstract:Titania nanowire arrays have been deposited on Ti foils through direct oxidizing the Ti substrate with aqueous hydrogen peroxide solutions containing melamine and nitric acid, and the applicability of such nanowire arrays to back-illuminated dye-sensitized solar cells studied in parallel with titania nanotube arrays on Ti foils. The low-temperature nitrogen adsorption measurement reveals that the film with nanowires 25nm in diameter and 1μm in length possesses a BET specific surface area of 59.0m2g−1, a value much larger than 26m2g−1 calculated for the nanotube with an inner diameter of 80nm, an outer diameter of 120nm and a total length of 3μm. Assuming an indirect transition between band gaps, the nanowire film exhibits a bandgap of 3.1eV, slightly larger than that of 3.0eV for the nanotube one. A detailed electrochemical study suggests that, in comparison with the nanotube film, the nanowire one exhibits much lower saturated photocurrent and poorer conductivity under the Xe-lamp irradiation. However, when utilized to construct back-side illuminated dye-sensitized solar cells, the cell with the 2μm-thick nanowire photoanode possesses significantly higher efficiency than the one with the 3μm-thick nanotube photoanode. The relatively high energy conversion efficiency is contributed to the high specific surface area and the unique mesoporous structure of the titania nanowire arrays, which favors the adsorption of dye molecules.

Dye-Sensitized Solar Cells with Vertically Aligned Tio2 Nanowire Arrays Grown on Carbon Fibers

Ordered TiO2 Nanotube Arrays on Transparent Conductive Oxide for Dye-Sensitized Solar Cells

Highly ordered hierarchical TiO2 nanotube arrays for flexible fiber-type dye-sensitized solar cells

Fabrication of Morphology Controllable Rutile TiO2 Nanowire Arrays by Solvothermal Route for Dye-Sensitized Solar Cells

Intertwined Aligned Carbon Nanotube Fiber Based Dye-Sensitized Solar Cells

A novel approach to titania nanowire arrays as photoanodes of back-illuminated dye-sensitized solar cells

Fiber dye-sensitized solar cells consisting of TiO2 nanowires arrays on Ti thread as photoanodes through a low-cost, scalable route

Solvothermal Growth of Well-Aligned TiO2 Nanowire Arrays for Dye-Sensitized Solar Cell: Dependence of Morphology and Vertical Orientation Upon Substrate Pretreatment

Winding Ultrathin, Transparent, and Electrically Conductive Carbon Nanotube Sheets into High-Performance Fiber-Shaped Dye-Sensitized Solar Cells

A cylindrical core-shell-like TiO2 nanotube array anode for flexible fiber-type dye-sensitized solar cells.

Highly efficient and completely flexible fiber-shaped dye-sensitized solar cell based on TiO 2 nanotube array

Ultralong Rutile TiO2 Nanowire Arrays for Highly Efficient Dye-Sensitized Solar Cells.

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Photovoltaic cells based on dye-sensitisation of single-wall carbon nanotubes in a polymer matrix

Transparent, 3-Dimensional Light-Collected, And Flexible Fiber-Type Dye-Sensitized Solar Cells Based On Highly Ordered Hierarchical Anatase Tio2 Nanorod Arrays

Au/TiO2 Nanotube Array Based Multi-Hierarchical Architecture for Highly Efficient Dye-Sensitized Solar Cells

Designing aligned inorganic nanotubes at the electrode interface: towards highly efficient photovoltaic wires.

A novel fabrication of a well distributed and aligned carbon nanotube film electrode for dye-sensitized solar cells

All Carbon Nanotube Fiber Electrode-Based Dye-Sensitized Photovoltaic Wire

High-efficiency Solid-State Dye-Sensitized Solar Cells: Fast Charge Extraction Through Self-Assembled 3D Fibrous Network of Crystalline TiO2 Nanowires.

ZnO/TiO 2 Core–shell Nanowire Arrays for Enhanced Dye-Sensitized Solar Cell Efficiency