Abstract:High temperature looping cycles involving solid circulation, such as carbonation calcination, play an essential role among the CO2 capture technologies under development. The low cost and high availability of Ca-based sorbents together with the feasibility of integration between these capture systems and existing power plants lead to very competitive potential costs of avoided CO2, below 20 epsilon/tonne. Optimal configurations make use of several interconnected fluidized beds. One promising configuration for Ca-based sorbents looping systems relies on the use of two circulating beds (carbonator and calciner) and two bubbling beds acting as non-mechanical valves. Fluidized beds are well characterized when operating independently since they are extensively used in industrial applications, power and chemical plants. However, the operation when two or more fluidized beds exchange solid material through non-mechanical valves is still uncertain because of the more complex pressure balance of the system. Theoretical studies based on thermo-chemical simulations and experimental studies show that minimum CO2 capture cost is attained with large solid circulation flow between reactors. The challenge is to reach the required particle circulation in a system with a complex configuration and be able to control it. Solid internal recirculation in any of these fluidized beds would provide flexibility in its control but it will also make harder the characterization of the whole system. The aim of this work is to analyse the hydrodynamics of the system and to generate a comprehensive mathematical model to better understand the interaction between the elements of the system. Measurements of circulation rate, static pressure, voidage profiles and standpipe height of solids have been used to identify trends in the hydrodynamic behaviour of the whole system while varying fluidizing gas velocities in the risers, loop-seals, solid inventories in the reactors or size distribution of the particles. These measurements are also used to adjust and validate the mathematical model presented in this study. (C) 2011 Elsevier Ltd. All rights reserved.

A novel calcium looping absorbent incorporated with polymorphic spacers for hydrogen production and CO2 capture

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

Demonstration of Polymorphic Spacing Strategy Against Sintering: Synthesis of Stabilized Calcium Looping Absorbents for High-Temperature CO2 Sorption

Calcium Looping Technology Using Improved Stability Nanostructured Sorbent For Cyclic Co2 Capture

Nanostructured Fe2O3/MgAl2O4 Material Prepared by Colloidal Crystal Templated Sol–gel Method for Chemical Looping with Hydrogen Storage

Zirconia Incorporated Calcium Looping Absorbents with Superior Sintering Resistance for Carbon Dioxide Capture from in Situ or Ex Situ Processes

Hydrodynamical Model and Experimental Results of a Calcium Looping Cycle for CO2 Capture

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

Simultaneous CO 2 capture and heat storage by a Ca/Mg-based composite in coupling calcium looping and CaO/Ca(OH) 2 cycles using air as a heat transfer fluid

Energy Intensity Reduction of Ca-Looping Co2 Capture by Applying Mixing Loop Seals and Cyclonic Systems

Modified Ca-Looping materials for directly capturing solar energy and high-temperature storage

Development of a Steel-Slag-Based, Iron-Functionalized Sorbent for an Autothermal Carbon Dioxide Capture Process.

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

Development of Highly Effective CaO@Al2O3 with Hierarchical Architecture CO2 Sorbents Via a Scalable Limited-Space Chemical Vapor Deposition Technique

CaO/Ca(OH)2 heat storage performance of hollow nanostructured CaO-based material from Ca-looping cycles for CO2 capture

Performance of Oxygen Carriers with Different Porosities in Chemical Looping Water-Splitting

High-Entropy Fluorite Oxide-Modified CaO-Based Sorbent Pellets for Enhanced High-Temperature CO2 Capture

One-step fabricated Zr-supported, CaO-based pellets via graphite-moulding method for regenerable CO2 capture

Heterojunction-redox Catalysts of FexCoyMg10CaO for High-Temperature CO2 Capture and in Situ Conversion in the Context of Green Manufacturing

Chemical Looping Hydrogen Storage and Production: Use of Binary Ferrite-Spinel As Oxygen Carrier Materials

Review on the development of sorbents for calcium looping