Abstract:Granulation serves as an effective strategy for mitigating the elutriation of CaO-based sorbents in the fluidized bed-based Calcium Looping system designed for CO 2 capture. Here, hydrophobic interface-assisted casted CaO-based sorbent pellets were prepared via a range of hydrophobic materials, i.e., graphite, Nano-titanium dioxide, Nano-silica, and polyethylene powders. The contact Angle values of the composite slurry droplets for the four hydrophobic materials range from 126 to 143°, which can provide enough surface tension to form CaO-based sorbent pellets. Moreover, the Al-based stabilizer precursors in the form of oxide, nitrate and sol, respectively, were incorporated into CaO-based pellets aiming to enhance their cyclic CO 2 uptake stability. Soluble aluminum nitrate exhibits the superior performance on enhancing CO 2 uptake stability compared to Nano-alumina and alumina sol, whose superiority lies in its ability to disperse more evenly with the active CaO component. Therefore, the Al-supported CaO-based pellet (∼30 wt% of Ca 12 Al 14 O 33 ) with aluminum nitrate as the precursor of Al-based stabilizer remains excellent CaO carbonation conversion of 50.3 % after 20 cycles, approximately 2 times that of pure CaO pellet. Even under harsh calcination condition (950 °C, 100 vol% CO 2 ), the Al-supported CaO-based pellet is still markedly superior to CaO pellet for cyclic CO 2 capture. The freshly calcined Al-supported CaO-based pellet exhibits highly desirable compressive strength (3.4 ± 0.83 MPa), compared to 0.35 ± 0.07 MPa for pure CaO pellet. The generated inert Ca 12 Al 14 O 33 skeleton provides structural stability and strength to the Al-supported, CaO-based pellets, which simultaneously contributes to the enhanced cyclic CO 2 uptake capacity and mechanical property.

Demonstration of Polymorphic Spacing Strategy Against Sintering: Synthesis of Stabilized Calcium Looping Absorbents for High-Temperature CO2 Sorption

CO2 Sorption Durability of Zr-Modified Nano-CaO Sorbents with Cage-like Hollow Sphere Structure

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Effects of Drying Methods on Wet Chemistry Synthesis of Al-Stabilized CaO Sorbents for Cyclic CO2 Capture

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Effects of the Inert Materials on the Stability ofCa-Based CO 2 Sorbents and the Synergy with Cement Manufacture

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

Reactivity and Microstructure of Synthetic CaO-based Sorbents for CO2 Capture

New insights into stabilizing mechanism of Ca9Al6O18 stabilizing Ca-based sorbents for CO2 cyclic capture under mild conditions

Hydrophobic interface-assisted casting of Al-supported, CaO-based sorbent pellets for high-temperature CO 2 capture

Inhibitory Effect of Na and Al on the Sintering Phenomenon of Calcium-Based Sorbents during Calcium Looping

High-Entropy Fluorite Oxide-Modified CaO-Based Sorbent Pellets for Enhanced High-Temperature CO2 Capture

Performance of Coal Fly Ash Stabilized, CaO-based Sorbents under Different Carbonation–Calcination Conditions

In-Situ observation and quantitative analysis on sintering process of Li4SiO4 sorbents

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

Strengthening performance of Al-stabilized, CaO-based CO 2 sorbent pellets by the combination of impregnated layer solution combustion and graphite-moulding

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO2 Capture