Abstract:The Ce x Ti 1− x O 2 mixed oxides at different mole ratios ( x =0.1–1.0) were prepared by co-precipitation of TiCl 4 and Ce(NO 3 ) 3 . The structural and reductive properties of the Ce x Ti 1− x O 2 were affected by calcination temperature. At x =0.1–0.3, CeTi 2 O 6 phase was formed and mainly as amorphous after calcination at 650°C. At x =0.3, only CeTi 2 O 6 was formed after calcination at 750°C and CeTi 2 O 6 crystallized completely after calcination at 800°C. TPR analyses showed that the amount of H 2 consumption by Ce x Ti 1−x O 2 (650°C) (except x =0.1) was greater than that by single CeO 2 , and the valence of CeO 2 was the lowest (+3.18) at x =0.3. CuO/Ce 0.3 Ti 0.7 O 2 was prepared by the impregnation method and catalytic properties were examined by means of a GC micro-reactor NO+CO reaction system, BET, TPR, XRD, XPS and NO-TPD. It was found that CuO/Ce 0.3 Ti 0.7 O 2 calcined at 650°C had the highest activity in NO+CO reaction with 100% NO conversion at reaction temperature of 300°C, and at 650°C Ce 0.3 Ti 0.7 O 2 just began to crystallize. The catalytic activities were largely affected by the pre-treatment conditions. At low reduction temperature (100°C), CuO species was difficult to reduce. When high degree of reductions took place, both CuO species and Ce 0.3 Ti 0.7 O 2 reduced and thus a part of CuO species on the support surface would be covered. The XPS and NO-TPD analyses showed that CuO/Ce 0.3 Ti 0.7 O 2 had four NO absorption centers (Cu + , Cu 2+ (I), Cu 2+ (II) and Ce 3+ ). The CuO species involving in NO+CO reaction included Cu 2+ (I) and Cu + , and CeO 2 species (Ce 3+ and Ce 4+ ).

Promotional effect of CeOX for NO reduction over V2O5/TiO2-carbon nanotube composites

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Promotional effect of CeO2 on low-temperature selective catalytic reduction of NO by NH3 over V 2 O5-WO3/TiO2 catalysts

Promotional Effects of Carbon Nanotubes on V2O5/TiO2 for NOX Removal.

The Effect of CeO2 on the Catalytic Activity and SO2 Resistance of the V2O5-MoO3/TiO2 Catalyst Prepared Using the Ball Milling Method for the NH3-SCR of NO

Promotional Effect of Ce-doped V<sub>2</sub>O<sub>5</sub>-WO<sub>3</sub>/TiO<sub>2</sub>with Low Vanadium Loadings for Selective Catalytic Reduction of NO<i><sub>x</sub></i>by NH<sub>3</sub>

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

Preparation and Characterization of Ce 0.3 Ti 0.7 O 2 and Supported CuO Catalysts for NO+CO Reaction

Promotional effect of CO pretreatment on CuO/CeO2 catalyst for catalytic reduction of NO by CO

Preparation and Characterization of Ce<sub>0.3</sub>Ti<sub>0.7</sub>O<sub>2</sub> and Supported CuO Catalysts for NO+CO Reaction

Selective catalytic reduction of NOX with ammonia over Mn–Ce–OX/TiO2-carbon nanotube composites

Catalytic Reduction of NO with NH 3 over V 2 O 5 -MnO X /TiO 2 -Carbon Nanotube Composites

Preparation and Characterization of CuO/Ce0.5Ti0.5O2 and Its Catalytic Activity for NO+CO Reaction

FeCeOx with Improved Activity for Catalytic Reduction of NO with NH3

Facile preparation of hollow MnOx-CeO2 composites with low Ce content and their catalytic performance in NO oxidation

Promotional Effect of Ce on the Activity of In/W–ZrO 2 for Selective Reduction of NO X with Methane

The Effect of SiO2 on a Novel CeO2–WO3/TiO2 Catalyst for the Selective Catalytic Reduction of NO with NH3

Effects of CuO/CeO2 and CuO/γ-Al2O3 catalysts on NO + CO reaction

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

Activity and Characterization of Ce–Mo–Ti Mixed Oxide Catalysts Prepared by a Homogeneous Precipitation Method for Selective Catalytic Reduction of NO with NH3