Abstract:In this letter, a refractive index sensing system is proposed and experimentally demonstrated. Acting as the sensing head, the no-core fiber spliced with two sections of single-mode fiber (SNS) is fabricated to form a fiber ring laser (FRL). The measured salt water changes the self-imaging wavelength of the NCF as well as the central wavelength of the FRL. After that, the light is introduced into the dual-loop optoelectronic oscillator (OEO). With the help of the dispersion compensation module in the OEO loop, the wavelength change is mapped into the frequency shift of the generated microwave signal. Hence, the RI of the measured liquid can be recovered by tracking the frequency change. Both the simulation analysis and the proof of concept experiment are performed. Results show that both the central wavelength of the FRL and the microwave signal increase exponentially with the increased RI, agreeing with the simulated analysis. In the range of 1.33-1.38, the linear fitting results manifest that the sensitivities of central wavelength change vs. RI and microwave signal shift vs. RI are 87.70 nm/RIU and 83.89 MHz/RIU, the corresponding resolutions are and , respectively. The proposed method shows potential for realizing high sensitivity, fast, and real-time RI measuring.

Refractive Index Sensing Measurement Based on Periodically Tapered Small Core Singlemode Fibre

Tapered Optical Fiber Sensing Technology

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Refractive index sensors based on the fused tapered special multi-mode fiber

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

Refractive index sensor based on ultrafine tapered single-mode nocladding single-mode fiber structure

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

Refractive Index Sensors Based on a Chirped Core Long-Period Fiber Grating

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

Cascaded Fiber Non-Adiabatic Taper and Sagnac Loop for Refractive Index Sensing

Multi-Point Fiber-Optic Refractive Index Sensor by Using Coreless Fibers

S-Tapered Fiber Sensors for Highly Sensitive Measurement of Refractive Index and Axial Strain

Fiber-Optic Refractive Index Sensor via Macro-Bending Tapered Waveguide

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Highly Improved Refractive Index Sensitivity in Fiber Mach-Zehnder Interferometer Based on Two Tapers

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Compact refractive index sensor based on offset splicing long-period fiber grating