Abstract:The distributed actively heated fiber-optic method is widely used to measure soil thermal conductivity and water content. However, the significant limitations of this technique are that prior soil specific calibration is required, and the measurement of soil volumetric heat capacity, a critical soil thermal parameter, is restricted. This study investigates a novel fiber-optic dual-probe heat pulse method, which utilizes fiber-optics to monitor the temperature response at a certain distance from the heat source to obtain the thermal conductivity and the volumetric heat capacity. Subsequently, the water content can be estimated from its linear relationship with soil volumetric heat capacity. The fiber-optic dual-probe heat pulse method is aimed to overcome the spatial-scale measurement limitations considering the distributed sensing capability of fiber-optic. This requires the sensor to be more robust than the traditional dual-probe method, hence a completely different ratio of the probe diameter to the distance between adjacent cables. Therefore, the applicability of the existing theory needs further verification, and the heating strategies need careful consideration. This study uses a 6 mm diameter fiber Bragg grating (FBG) sensor encapsulated by the alundum tube to conduct laboratory feasibility tests. Two adjacent sensors are fixed in the soil at a distance of 14.60 mm. Different heating powers (30 W/m, 40 W/m, and 50 W/m) and heating durations (10 s, 30 s, 50 s, and 120 s) are implemented. The results showed that the novel approach allows accurate soil volumetric heat capacity and water content estimation with appropriate heating strategies and data interpretation methods. The heating duration below 30 s is a poor fit because of the low-temperature rise, requiring a longer heating duration. For the 120 s heating duration, the measurement error in soil volumetric capacity is less than 2%. On the other hand, the instantaneous line heat source theory overestimates the soil volumetric heat capacity by 5%, while the short-duration line heat source theory performs well in the method.

Performance Evaluation of Two Types of Heated Cables for Distributed Temperature Sensing-Based Measurement of Soil Moisture Content

A study of soil thermal conductivity measurement based on the actively heated distributed temperature sensing cable

A Distributed Measurement Method for In-Situ Soil Moisture Content by Using Carbon-Fiber Heated Cable

Distributed method for measuring moisture content of soils based on C-DTS

Towards Improved Field Application of Using Distributed Temperature Sensing for Soil Moisture Estimation: A Laboratory Experiment

Improvement and Performance Evaluation of a Dual-Probe Heat Pulse Distributed Temperature Sensing Method Used for Soil Moisture Estimation

An Improved Distributed Sensing Method for Monitoring Soil Moisture Profile Using Heated Carbon Fibers

Investigation of the Influence of Soil Moisture on Thermal Response Tests Using Active Distributed Temperature Sensing (A–DTS) Technology

Research on Temperature Monitoring Method of Cable on 10 kV Railway Power Transmission Lines Based on Distributed Temperature Sensor

A Technique for Assessment of Thermal Condition and Current Rating of Underground Power Cables Installed in Duct Banks

A Field Study on the Application of Distributed Temperature Sensing Technology in Thermal Response Tests for Borehole Heat Exchangers

Uncertainties in Measuring Soil Moisture Content with Actively Heated Fiber-Optic Distributed Temperature Sensing

DISTRIBUTED FIELD SOIL MOISTURE USING C-AHFO METHOD:LONGTERM MONITORING AND FEASIBILITY

A Dual-Probe Heat Pulse Approach Using Heated Fiber-Optic Temperature Sensing

Fiber optic distributed temperature sensing for the determination of air temperature

A Distributed High-Density Resistivity Meter Working on a Two-Wire Cable

Distributed Temperature Sensing: Review of Technology and Applications

Strongly robust approach for temperature monitoring of power cable joint

Numerical Calculation of Real-Time Ampacity of High Voltage Power Cable Duct Laying Based on Environmental Information

Inversion of Soil Thermal Conductivity and Ampacity of the Buried High Voltage Power Cables

Actively heated fiber optics based thermal response test: A field demonstration