Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Resonant Excitation of Ethylene Molecules in the Combustion Flame CVD of Diamond Using a Wavelength Tunable CO 2 Laser

Laser-power-resolved Excitations of Ethylene Molecules in Laser-Assisted Synthesis of Diamond Films

Laser-Assisted Synthesis of Diamond Crystals in Open Air Through Vibrational Excitation of Precursor Molecules

Excitations of Precursor Molecules by Different Laser Powers in Laser-Assisted Growth of Diamond Films

Spectroscopic Determination of Rotational Temperature in C2H4/C2H2/O2 Flames for Diamond Growth with and Without Tunable CO2 Laser Excitation.

Characterization of diamond thin films deposited by a CO2 laser-assisted combustion-flame method

Fast Growth of Diamond Crystals in Open Air by Combustion Synthesis with Resonant Laser Energy Coupling

Research on Excimer Laser Induced Chemical Vapor Deposition of Diamond Films

Effect of frequency on low temperature synthesis of diamond by pulsed discharge MPCVD

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Laser-assisted Chemical Vapor Deposition of Diamond Films

Maximizing visible Raman resolution of nanodiamond grains fabricated by coaxial arc plasma deposition through oxygen plasma etching optimization

[Optical Spectroscopy for High-Pressure Microwave Plasma Chemical Vapor Deposition of Diamond Films]

Nanosecond pulsed laser-processing of CVD diamond

Growth of single-crystal diamond by microwave plasma CVD with high precursor utilization using cyclic gas injection and control of carbonaceous species content with optical emission spectroscopy

Resonant Excitation of Precursor Molecules in Improving the Particle Crystallinity, Growth Rate and Optical Limiting Performance of Carbon Nano-Onions

Pulsed-laser deposition of diamond-like carbon: Relations between laser fluence, velocity of carbon ions, and bonding in the films

Molecular dynamics simulation of laser-induced graphitization of CVD diamond

Evolution of High-Quality Homoepitaxial CVD Diamond Films Induced by Methane Concentration

CO2 LASER-DRIVEN REACTIONS IN PURE ACETYLENE FLOW

Facile Diamond Synthesis from Lower Diamondoids