Abstract:The ability to detect trace concentrations of arsenite, As (III), in real water solutions is impacted by co-contamination of other metals and co-occurring ions. The presence of copper (II) ions are the most likely co-contaminant in natural waters to interfere with electrochemical As (III) detection, due to the close oxidation potentials of Cu (II) and As (III). The use of well-oriented ultraflat Au(111) thin film electrodes provided increased peak separation and sensitivity for electrochemical deposition and oxidation of Cu (II) and As (III) in 0.5 M sulfuric acid compared to an Au wire electrode. However, mixtures of Cu (II) and As (III) altered the oxidation peak positions during both cyclic voltammetry (CV) and linear stripping voltammetry (LSV) analysis. Calibration curves using the standard additions method in trace concentrations were conducted for Cu, As, and Cu & As solutions. Sweeping the potential at 10 mV s −1 during CV in Cu & As mixtures resulted in a sequential deposition condition where a layer of Cu inhibited co-deposition of As to the electrode. In contrast, the rapid potential stepping of LSV to a potential where Cu and As reduction simultaneously occurs produced a peak profile different from Cu or As alone. A larger oxidation peak during LSV was also observed when both Cu and As were present. X-ray photoelectron spectroscopy indicates a Cu-As alloy is formed on the surface after LSV deposition. SYNOPSIS: Analysis of Cu (II), As (III) and Cu (II) & As (III) mixtures suggests that a Cu 3 As intermetallic phase is formed during LSV which impacts trace As detection even in trace Cu conditions. This has important implications for the ability to determine As concentrations near the MCL of 10 μg L −1 in natural water systems which may contain Cu (II) and other co-contaminants.

Ultra Trace Copper Determination by Catalytic-Adsorptive Stripping Voltammetry Using an Alizarin Red S modified Graphite Electrode

Determination of Cu2+ Using Poly(2-aminothiazole)/Multi-Walled Carbon Nanotubes Composite Film Modified Glassy Carbon Electrodes

Stripping voltammetric determination of copper(II) in natural waters and human hairs based on the adsorption of its complex with Kryptofix 22 on the carbon paste electrode

Development of a new electrochemical method for the determination of copper(ii) at trace levels in environmental and food samples

Sensitive determination of copper (H) based on an ordered mesoporous carbon/nano-gold/L-cysteine modified electrode

Copper Film Modified Glassy Carbon Electrode and Copper Film with Carbon Nanotubes Modified Screen-Printed Electrode for the Cd(II) Determination

Poly(2-Amino-4-Thiazoleacetic Acid)/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrodes for the Electrochemical Detection of Copper(Ii)

Electrochemical Redox of Arsenic (III) and Cu (II) Mixtures with Ultraflat Au(111) Thin Films in Water

A novel fast room-temperature cloud point extraction coupled to graphite furnace atomic absorption spectroscopy for Copper(II) traces determination

Cu(II) Traceability in Industrial Samples: Innovating Detection with Modified Nanoparticles and Magnetic Electrodes

ADSORPTIVE STRIPPING VOLTAMMETRIC STUDY OF SCANDIUM–ALIZARIN COMPLEXAN COMPLEX AT A CARBON PASTE ELECTRODE

Effective and High-Throughput Analytical Methodology for the Determination of Lead and Cadmium in Water Samples by Disposable Pipette Extraction Coupled with High-Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry (HR-CS GF AAS)

Adsorbent-Assisted In Situ Electrocatalysis: Highly Sensitive and Stable Electrochemical Sensor Based on AuNF/COF-SH/CNT Nanocomposites for the Determination of Trace Cu(II)

Determination of trace labile copper in environmental waters by magnetic nanoparticle solid phase extraction and high-performance chelation ion chromatography

Electrochemical Determination of Copper in Aqueous Media at a Carbon Paste Electrode Modified with Natural-Based Nanocomposite and Carbon Nanotubes

Absence of a diffusion anomaly of water in the direction perpendicular to hydrophobic nanoconfining walls.

Determination of Ultra-Trace Cobalt in Water Samples Using Dispersive Liquid-Liquid Microextraction Followed by Graphite Furnace Atomic Absorption Spectrometry

PRECONCENTRATION OF TRACE COPPER IN WATER SAMPLES WITH FI-SOLVENT EXTRACTION AND AAS

Screen-Printed Carbon Electrode Modified with Carbon Nanotubes and Copper Film as a Simple Tool for Determination of Trace Concentrations of Lead Ions

Selective determination of cuprous ion in copper dissolving solution based on bathocuproine-modified expanded graphite electrode

Chemically Modified Activated Carbon With 1-Acylthiosemicarbazide For Selective Solid-Phase Extraction And Preconcentration Of Trace Cu(Ii), Hg(Ii) And Pb(Ii) From Water Samples