Abstract:A new fast, sensitive, and environmentally friendly analytical method has been developed for the simultaneous determination of Ba, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn in wastewater samples using inductively coupled plasma optical emission spectroscopy (ICP OES). A preconcentration step using a magnetic dispersive solid-phase extraction (MDSPE) technique with a new magnetic sorbent was performed. The new sorbent material was a carbon containing magnetic cobalt and nitrogen groups. This material was synthetized using controlled pyrolysis of a zeolitic imidazolate framework (i.e., ZIF-67). In order to optimize the experimental parameters that affect the MDSPE procedure, a multivariate optimization strategy, using Plackett–Burman and circumscribed central composite designs (CCD), was used. The method has been evaluated employing optimized experimental conditions (i.e., sample weight, 10 g; sample pH, 7.6; amount of sorbent, 10 mg; dispersive agent, vortex; complexing agent concentration, 0.5%; ionic concentration, 0%; eluent, HCl; eluent concentration, 0.5 M; eluent volume, 300 μL; elution time, 3 min and extraction time, 3 min) using external calibration. Limits of detection (LODs) in a range from 0.073 to 1.3 μg L−1 were obtained, and the repeatability was evaluated at two different levels, resulting in relative standard deviations below 8% for both levels (n = 5). An increase in the sensitivity was observed due to the high enrichment factors (i.e., 3.2 to 13) obtained compared with direct ICP OES analysis. The method was also validated through carrying out recovery studies that employed a real wastewater sample and through the analysis of a certified reference material (ERM®-CA713). The recovery values obtained with the real wastewater were between 94 and 108% and between 90 and 109% for the analysis of ERM®-CA713, showing negligible matrix effects.

Cu(II) Traceability in Industrial Samples: Innovating Detection with Modified Nanoparticles and Magnetic Electrodes

Core–Shell Chitosan Cobalt Ferrite Nanoparticles for Ultrasensitive Simultaneous Voltammetric Determination of Pb(II) and Cd(II)

Development of a new electrochemical method for the determination of copper(ii) at trace levels in environmental and food samples

A Multifunctional Magnetic Fluorescent Nanoprobe for Copper(II) Using ZnS-DL-Mercaptosuccinic Acid-Modified Fe3O4 Nanocomposites

Determination of trace labile copper in environmental waters by magnetic nanoparticle solid phase extraction and high-performance chelation ion chromatography

Electrochemical Determination of Copper in Aqueous Media at a Carbon Paste Electrode Modified with Natural-Based Nanocomposite and Carbon Nanotubes

A facile approach for cupric ion detection in aqueous media using polyethyleneimine/PMMA core-shell fluorescent nanoparticles.

Adsorbent-Assisted In Situ Electrocatalysis: Highly Sensitive and Stable Electrochemical Sensor Based on AuNF/COF-SH/CNT Nanocomposites for the Determination of Trace Cu(II)

In-situ highly selective colorimetric trace level recognition of lead and copper ion in real samples by silver nanoparticles

Design and Fabrication of Silver Nanoparticles Doped β-cyclodextrin-chitosan Functionalized Graphene Nanocomposite Modified Electrode for Determination of Cu(II)

Embedded Au Nanoparticles-Based Ratiometric Electrochemical Sensing Strategy for Sensitive and Reliable Detection of Copper Ions.

Determination of Trace Copper Ions with Ultrahigh Sensitivity and Selectivity Utilizing Cdte Quantum Dots Coupled with Enzyme Inhibition

Highly Selective in Situ Metal Ion Determination by Hybrid Electrochemical “adsorption–desorption” and Colorimetric Methods

Selective Detection of Trace Amount of Cu2+ Using Semiconductor Nanoparticles in Photoelectrochemical Analysis

Determination of Trace Cd(II) in Water and Cosmetics based on Au/GO/CuO Nanocomposite Functionalized Electrochemical Sensor

Preconcentrating extractive polymeric network in paper-based sensing of copper

An ESIPT active coumarin-diphenyl azine-based AIEgen: Nanomolar Cu 2+ ion sensing, Latent Fingerprinting, live-cell imaging, and real sample analysis

Enhancing Trace Metal Extraction from Wastewater: Magnetic Activated Carbon as a High-Performance Sorbent for Inductively Coupled Plasma Optical Emission Spectrometry Analysis

A highly selective and sensitive electrochemical Cu(II) detector based on ion-imprinted magnetic carbon nanospheres

Ion-selective gold-thiol film on integrated screen-printed electrodes for analysis of Cu(II) ions.

Ultrasensitive and Selective Detection of Copper (II) and Mercury (II) Ions by Dye-Coded Silver Nanoparticle-Based SERS Probes