Dynamic Stiffness Analysis and Modal Identification on Bearing Support of Large-Scale High-Speed Dynamic Balancing Machine
Shengtong Zhou,Zhenghao Sun,Yan Liu,Hongguang Li
2013-01-01
Abstract:The dynamic characteristics, such as dynamic stiffness, resonance frequencies and mode shapes, of bearing supports in dynamic balancing machines directly affect the accuracy and safety of balancing test. In present paper, the procedure for dynamic stiffness analysis and modal identification of such a bearing support in a 200 tons large-scale high-speed dynamic balancing machine was presented. An impact hammer excitation test system was first designed to acquire the 45 degrees, horizontal, vertical and cross dynamic stiffness of bearing support, which were termed as hammering dynamic stiffness in this paper. From the hammering dynamic stiffness data, the dynamic behavior states of bearing support were discussed, and several resonance frequencies were also identified according to their obvious curve valleys. In order to further identify the mode shapes corresponding to the identified resonance frequencies, a crude Finite Element (FE) model of bearing support was constructed by a Frequency Correlation Analysis based (FCA-based) model updating technology. With the crude FE model, we obtained the modal information from modal analysis, calculated the dynamic stiffness from harmonic response analysis, and performed static analysis to know its displacements information. And then, the mode shape identification was accomplished after a comprehensive analysis of the hammering dynamic stiffness data and the FE simulation results. We found that the crude FE model of bearing support did not accurately reflect the dynamic behavior, but it really acted well in the modal identification process. And at last, seven resonance frequencies together with their corresponding mode shapes of bearing support are reasonably identified.