Abstract:Transmission components are the main mechanical elements in a machine system, the accuracy level of the transmission system is one of the major sources of the machining error of multiaxis machine tools. This article investigates motion error analysis, volumetric motion error model for transmission system and the accuracy allocation method for multiaxis machine tools during the early design stage. For this purpose, a transmission system volumetric motion error model, which is based on the motion error matrix and screw theory, is derived for mapping transmission components' error parameters to the volumetric motion errors of machine tools. The volumetric motion error matrix combines motion errors along the machine tools' kinematic chains. Subsequently, the volumetric motion error model is expressed as a volumetric motion error twist, which is formulated from the volumetric motion error matrix. Additionally, the transmission system volumetric motion error twist model is used as design criteria for accuracy optimum allocation, with constraints on the twist magnitude and design variable limits. Then, design optimization is performed by using a multiobjective nonlinear optimization technique to minimize the manufacturing cost and volumetric motion error twist pitch. To solve this multiple objective optimum problem, this study proposes an approach integrating Lagrange multiplier and gradient descent operator with non-dominated sorting genetic algorithm-II (NSGA-II). Modified non-dominated sorting genetic algorithm-II searches for an allocation scheme Pareto optimal front. Consequently, VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) determines the best compromise solution from the Pareto set. Finally, a numerical experiment for the optimal design of a numerical control machine tool is conducted, which highlights the advantages of the proposed methodology.

Optimal Design Based on Method of Linearly Independent Vectors for Weight-Balancing Blocks in Ultra-High-Speed Pressing Machine

Optimal Design for Partial Inertia Force Cancellation in Ultra High Speed Pressing Machine

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Analysis and Simulations of Inertia Force in Ultra High Speed Stamping Machine

Research on key technologies of automated balancing machines

OPTIMIZATION OF PRESTRESS IN THE SHELL EMBEDDED OF SELF-BALANCING UNIT

Multi-Objective Optimization of Inertia Equilibrium in Ultra High Speed Stamping Machine

The Study of Dynamic Balancing for High-Speed Presses

Dynamics Analysis of Mass Block and Optimization Design of Take-up Mechanism for Space Net

Block Discouple Control of Cross-Directional Basis Weight on Paper Machines*

Structural Optimization of Typical Rigid Links in a Parallel Kinematic Machine

Dynamic Analysis and Counterweight Optimization of the 2-Dof Parallel Manipulator of A Hybrid Machine Tool

Equilibrium Analysis and Simulation Calculation of Four-Star Type Crank Linkage Mechanism

A METHOD TO SELECT WEIGHTS IN ONLINE DYNAMIC BALANCE TECHNOLOGY BASED ON ROTOR-ACTIVE MAGNETIC BEARING SYSTEM

Transmission System Accuracy Optimum Allocation for Multiaxis Machine Tools' Scheme Design

Modal Analysis and Optimal Design of High-Speed Turning Center’s Spindle Box

Research on the Application of Structural Topology Optimisation in the High-Precision Design of a Press Machine Frame

Simulation-based dynamic optimal design of crankshaft counterweights

Structure optimization for hydraulic press based on approximate model

Static and Dynamic Deformation Analysis and Optimization of a Fine Blanking Press Frame