Abstract:The undesired synchronous vibration due to rotor mass imbalance is a main disturbance source in all rotating machinery including active magnetic bearing (AMB)-rotor systems. In the AMB-rotor system, imbalance compensation, which causes the AMB actuators to spin a rotor about its geometric axis, and automation balancing, which spins a rotor about its inertial axis, are two kinds of common control aim for the rotor imbalance control. In this study, the internal relation between the imbalance compensation and the automation balancing is analyzed and a uniform control method is proposed. With the identical control algorithm, the proposed control method can realize the automation balancing or the imbalance compensation, respectively, by switching the controller's junction position in the original control loop. The proposed control method does not depend on the dynamic plant model, because its algorithm is based on the real-time identification for the Fourier coefficient of the rotor imbalance disturbance. In this paper, the process of identification algorithm is given in detail and all the possible junction forms of the controller are illustrated. By the simulations, the identification performances of the control algorithm are compared in the conditions with three variable factors, including the signal noise ratio (SNR), the imbalance phase and the identification delay time. The noise level has considerable influence on the identification precision, but the imbalance phase has little. To prolong the identification delay time will be of benefit to improve the identification precision but slow down the identification process. Experiments, which are carried out on an AMB-rigid rotor test rig, indicate that by switching the junction position of the controller in control loop, both kinds of rotor imbalance control can achieve the good effectiveness. [DOI: 10.1115/1.4005279]

Research on key technologies of automated balancing machines

Model Building and Intelligent Programming System for Electric Motor Armatures Automated Balance Correction

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Design and Implementation of Automatic Balancing Machine for Pump Impeller

Study of Automatic Dynamic Balancing System for Engine Crankshaft

Study on Calibration Method and System Error Compensation of Balancing Machines

Study on Application of Integral Digital Filter in Measurement System of Balancing Machines

RESEARCH ON DIGITAL FILTERING ALGORITHM USED INMEASUREMENT SYSTEM OF BALANCING MACHINES

Development of DSP-based measurement system of balancing machines

Research and Development on New Measure-control System for Dynamic Balancing Machine Based on Easy Eisplaying Technology

Review for Studying on Active Hybrid Auto-Balancer of Grinding Wheel and Motor Spindle

Status Research of Active Balancing Machine for Spindle of Ultra-precision Machine Tool

The Design of Automatic Balancing System by Mass Removing Based on Lab Windows/CVI

A Study on PC/104 Embedded Automatic Balancing Control System

A Dynamic-Balancing Testing System Designed for Flexible Rotor

Research on Balance Measurement System Based on Embedded OMAP and Filtering Technology

Research on the CNC Machining System for Dynamic Balancing Emendation and Its Key Technologies

On-line Current Feed and Computer Aided Control Tactics for Automatic Balancing Head

Control strategy and experiment research on liquid-transfer active balancing device by pneumatic means for grinding machines

A uniform control method for imbalance compensation and automation balancing in active magnetic bearing-rotor systems