Abstract:The object of research is the process of dynamic balancing of rotors on a balancing machine in the process of restoring electric machines. The work is aimed at improving the quality of balancing rotors in the process of major repairs of traction electric motors for electric trains. The problem addressed was the quality of balancing the rotors of electric machines on stationary balancing machines. According to the conventional balancing technology, the rotor to be balanced is mounted on the supports of the balancing machine with support surfaces that usually have mechanical defects. These defects cannot be eliminated by machining due to the peculiarities of rotor repair technology. Theoretical and experimental studies of the effect of damage to the rotor support surfaces on the balancing parameters have been carried out. It has been proven that the properties of the bearing surfaces of the rotor during its balancing on a balancing machine significantly affect the results of determining the imbalance. At the same time, the difference in the mass values of balancing loads can reach 25 %. This is because damage to the bearing surfaces of the rotor generates false signals unrelated to the imbalance. In order to increase the accuracy of determining the mass of balancing loads during rotor balancing, it is proposed to improve the technological process of balancing. The improvement involves the inclusion of a frequency filter in the signal conversion chain of acceleration sensors. The filter is designed to separate signals with a frequency greater than the rotational frequency of the rotor. A condition for the practical application of the research results is the expediency of introducing a frequency filter of signals of acceleration sensors with a threshold frequency of filtering signals that exceeds the rotational frequency of the rotor into the schematic diagram of the balancing machine.

Research and Development of Whole-Machine Balancing Instrument for High Speed Rotor

Extraction Of Unbalance Signals From Miniature-Rotor Dynamic Balancing Machine

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Research on key technologies of automated balancing machines

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Design and Implementation of Automatic Balancing Machine for Pump Impeller

Research on the Field Dynamic Balancing Technology and Instrument for a High Speed Cantilever Rotor

Study of Automatic Dynamic Balancing System for Engine Crankshaft

An Improved Whole-Machine Balancing Method Based on Double Auto-Correlation Measurement

A Design of Rotor's Dynamic Balancing Measuring System

Novel Liquid Transfer Active Balancing System For Hollow Rotors Of High-Speed Rotating Machinery

Development of DSP-based measurement system of balancing machines

STUDY ON HIGH ACCURACY BALANCING METHODS FOR HUGE ROTOR

The Study of an On-line Automatic Dynamic Balancing System and Its Dynamic Balancing Method when Used on a Flexible Rotor

Research on the Separating Method of Vibration Signals for the Dual-Rotor System with Little Speed Difference in the Rotating Machinery

A Rotor Auto-Balance Device with Continuously Injecting and Draining Liquid Based on Peristaltic Pumps

Dynamic Balancing of a Centrifuge: Application to a Dual-Rotor System with Very Little Speed Difference

Study on improving field first dynamic balancing precision of rigid rotors

A novel rotor dynamic balancing method based on blade tip clearance measurement without the once per revolution sensor

Improving the technological process of balancing electric machine rotors on a balancing machine