Abstract:The seismic simulating shaking table is a typical electro-hydraulic servo test system and is controlled by a servo valve. The test system is widely used in the structural anti-seismic test. The seismic simulating shaking table usually has a low frequency response and a low damping which greatly limit its application for the wide bandwidth test. To further expand the bandwidth of the seismic simulating shaking table and increase its damping TVC (three-variable control) algorithm is proposed. In this paper, we research the TVC (three-variable control) algorithm for the seismic simulating shaking table, and also analyze its correction actions on the system characteristics of the shaking table achieved by both the TVC feedback and TVC feedforward loops. Then we further verify the improvement effects on the system's frequency response characteristics of the shaking table taken by the TVC algorithm. The algorithm can expand the system bandwidth by introducing a velocity feedback and can increase the system damping by introducing an acceleration feedback. The TVC feedforward loop can eliminate the system poles near to the imaginary axis of system's closed-loop transfer function and can also further expand the system bandwidth. Finally, we conduct two types of tests on a seismic simulating shaking table: sine sweep tests and seismic waveform replication tests. The results of the sine sweep tests show that the TVC algorithm can effectively improve the system's frequency response characteristics of the shaking table and also improve its response speed. And the results of the seismic waveform replication tests show that the TVC algorithm can improve the replication accuracy of the seismic waveform.

The Control Strategy Study for Hydraulic Shaking Table

Control strategy in earthquake simulation test based on elastic payload

Control strategy for a hydraulic shaker controlled with a 3-stage electro-hydraulic servo valve

Research On Three-Variable Control Technology Of Seismic Simulating Shaking Tables

Control Strategy for Multi-Exciter Random Vibration Test

A Novel Three-Parameter Tuning Method For Seismic Simulation Shaking Table

Three-variable Control Technique for a Seismic Analog Shaking Table

Study on Control Method and System of Multi-Shaker Random Vibration Test

Neural Network Based Adaptive Robust Control of a Single-Axis Hydraulic Shaking Table

Power Spectra Density Replication Control Strategy for 2-Axis Hydraulic Shaker Based on HV Estimator

Research On The Control Strategy Of Hydraulic Shaking Table Based On The Structural Flexibility

LSTM‐based Adaptive Robust Nonlinear Controller Design of a Single‐axis Hydraulic Shaking Table

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Research on the degree of freedom control strategy for redundant-drive shaking tables

Synchronous Tracking Control Strategy of Dual-Actuator Excited Shaking Table

A Two-Loop Control Method for Shaking Table Tests Combining Model Reference Adaptive Control and Three-Variable Control

Tracking Control Of An Electro-Hydraulic Shaking Table System Using A Combined Feedforward Inverse Model And Adaptive Inverse Control For Real-Time Testing

Optimal Design and Hybrid Control for the Electro-Hydraulic Dual-Shaking Table System

Modeling and Vibration Decoupling Control of Multi-Axial Shaking Table

Continuous Swept-Sine Vibration Realization Combining Adaptive Sliding Mode Control and Inverse Model Compensation for Electro-hydraulic Shake Table

Implementation of Electrohydraulic Shaking Table Controllers with a Combined Adaptive Inverse Control and Minimal Control Synthesis Algorithm