Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

Research on the degree of freedom control strategy for redundant-drive shaking tables

The Control Strategy Study for Hydraulic Shaking Table

Control strategy in earthquake simulation test based on elastic payload

Research On Three-Variable Control Technology Of Seismic Simulating Shaking Tables

Research of Multi-Movement Parameters Iterative Control of Multi-Degrees-Of-Freedom Earthquake Simulation

Control Strategy for Multi-Exciter Random Vibration Test

Control strategy for a hydraulic shaker controlled with a 3-stage electro-hydraulic servo valve

Neural Network Based Adaptive Robust Control of a Single-Axis Hydraulic Shaking Table

Decoupled Adaptive Terminal Sliding Mode Control Strategy for a 6-DOF Electro-Hydraulic Suspension Test Rig with RBF Coupling Force Compensator

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Motion synchronization control of four multi-stage cylinders electro-hydraulic elevating system

LSTM‐based Adaptive Robust Nonlinear Controller Design of a Single‐axis Hydraulic Shaking Table

Research On The Control Strategy Of Hydraulic Shaking Table Based On The Structural Flexibility

Modeling and Vibration Decoupling Control of Multi-Axial Shaking Table

Synchronous Tracking Control Strategy of Dual-Actuator Excited Shaking Table

Internal Force Decoupling Control of Hyper-Redundant Shaking Table Based on Stiffness Matrix

Dynamics Decoupling Control Of Parallel Manipulator

A Two-Loop Control Method for Shaking Table Tests Combining Model Reference Adaptive Control and Three-Variable Control

Servo system of 6 DOF electro-hydraulic shaking table

Control Strategy of a 6-DOF Hydraulic Shaker

Optimal Design and Hybrid Control for the Electro-Hydraulic Dual-Shaking Table System