Abstract:We describe a quasi-distributed optical fiber strain sensor, whose principle of operation is based on the coherent frequency-modulated continuous-wave (FMCW) reflectometry technique. The sensing system is basically composed of a laser diode, which is frequency swept by a triangle waveform injection current and an unbalanced two-beam interferometer. Its test arm consists of a number of single-mode fibers, which act as sensing fibers, with a mirror at the far end and mechanical splices as the connectors as well as the reflectors. Theoretical analysis shows that the measuring resolution of the strain is inversely proportional to the length of the sensing fiber. To measure the strain variation of each sensing fiber, the phase shifts of the beat signals are demodulated by a heterodyne signal processing system. The requirement of a high precision temperature control of light source can be eliminated in this way, since temperature effect is insignificant to the phase demodulation technique. To calibrate and verify the linearity, feasibility, and accuracy of this system, tensile and bending tests were carried out and strain gauge was employed as the benchmarking tool over the experimental results. It was observed that this system is feasible and its accuracy is excellent. © 2002 Society of Photo-Optical Instrumentation Engineers.

0.1-Nano-strain Resolution Fiber Optic Sensor for Quasi-Static Strain Measurement with 1 Ks/s Sampling Rate

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

High-Sensitivity Microfiber Strain and Force Sensors

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay

High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Sagnac interferometer-based optical fiber strain sensor with exceeding free spectral measurement range and high sensitivity

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

Multilongitudinal Mode Fiber Laser for Strain Measurement

A mode-locked fibre laser temperature independent strain sensor based on intracavity pulse interference

Ultrahigh-Resolution Fiber-Optic Sensing Using a High-Finesse, Meter-Long Fiber Fabry-Perot Resonator

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer