Abstract:AbstractA thermomechanical model to describe the mechanisms of polishing pad scratching in chemical–mechanical planarization (CMP) has been formulated and investigated. CMP is a necessary process in integrated circuit (IC) fabrication to planarize wafers with nanoscale features after patterned layer deposition. Polishing pad asperities can produce microscale scratches on the wafer surface during CMP, reducing IC manufacturing yields. The constructed thermomechanical model accounts for stresses of the pad and wafer contact and also provides the means to track input energy dissipation during CMP. Tracking energy dissipation offers information about processes that may influence scratch production. This knowledge ultimately produces a greater physical understanding of CMP for the prevention of pad scratching. Polishing pad stress relaxation experiments demonstrate the importance of viscoelastic and plastic strain energy dissipation with its effects on the wafer stress field. Scratch producing ability of the polishing pad is found to decrease with use in CMP, with slurry soaking and increasing polishing time. Mechanical behavior of the polishing pad is demonstrated to differ when in compression and in tension. Compressibility of the pad material is shown to be significant in stress modeling through experimental measurement of polishing pad volume change. Differential scanning calorimetry of used polishing pad samples revealed energy dissipation into the polishing pad surface with increasing polishing time of CMP. Energy dissipation processes influence pad scratching in CMP. Analytical wafer stress field modeling unveils that the scratching ability of a polishing pad decreases when it is less stiff or has a smoother surface.

Quantification of Water Diffusion in CMP Pad Polymers and Impact on Mechanical Properties

Research on CMP Process Parameters Effect on Slurry Transport

Analysis on Pad Effects in Chemical Mechanical Polishing

Contribution of Porous Pad to Chemical Mechanical Polishing

Study on the CMP Pad Life with Its Mechanical Properties

Water transport in organic coatingsi: fickian diffusion

Estimating Chemical Mechanical Polishing Pad Wear with Compressibility

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

Characterization of Pad–Wafer Contact Area and Distance in Chemical-Mechanical Polishing

Porosity Model for Flows in CMP

Characterization of Pore Size Distribution and Water Transport of UHPC Using Low-Field NMR and MIP

Impact of Pad–Wafer Contact Area in Chemical Mechanical Polishing

The Deterioration Characteristics and Mechanism of Polishing Pads in Chemical Mechanical Polishing of Fused Silica

In Situ Measurement of Fluid Pressure at the Wafer-Pad Interface During Chemical Mechanical Polishing of 12-Inch Wafer

Assessment of water diffusion in epoxy composites: a novel approach towards holistic understanding

Wear phenomena in chemical mechanical polishing

Energy dissipation and constitutive modeling for a mechanistic description of pad scratching in chemical–mechanical planarization

A plasticity-based model of material removal in chemical-mechanical polishing (CMP)

Water Diffusivity Transition in Fumed Silica-Filled Polydimethylsiloxane Composite: Correlation with the Interfacial Free Volumes Characterized by Positron Annihilation Lifetime Spectroscopy

Analysis on Contact and Flow Features in CMP Process

Synthesis and Characterization of PDMS Modified UV-curable Waterborne Polyurethane Dispersions for Soft Tact Layers