Fabrication of Shape‐Controlled Copper Line Arrays by Meniscus‐Confined 3D Microprinting on Insulating Substrates
Yu Lei,Xianyun Zhang,Xiru Chai,Yifan Zhang,Aihua Sun,Yuchuan Cheng,Gaojie Xu,Jianjun Guo
DOI: https://doi.org/10.1002/adem.202400725
IF: 3.6
2024-08-04
Advanced Engineering Materials
Abstract:This article demonstrates the fabrication of copper line arrays on insulating substrates by a meniscus‐confined electrodeposition process, where the width and height of the copper lines are minimally affected by the height of the meniscus. Here, nano‐gapped copper connection lines with invariant feature sizes on stepped substrates were achieved Las Vegas, promising for microsystem integration. Meniscus‐confined electrodeposition (MCED), as a 3D printing process, exhibits excellent capabilities in microstructure fabrication. However, it faces numerous challenges, particularly when integrating with different substrates, especially insulating ones and cross‐layer interconnection. This study intends to investigate the impact of factors such as nozzle diameter, flight height of the nozzle over insulating substrates, and applied current by MCED on micro/nanoscale metal structures, to fabricate shape‐controllable and nanogap copper lines. As the flight height of the nozzle increases, there is no significant variation in the line height (≈60 nm) or width (≈15 nm) of the printed copper lines. And copper lines are successfully fabricated with consistent feature size oversteps totaling 1.2 μm in height. Additionally, highly dense copper line arrays are fabricated, achieving a minimum wire spacing of 120 nm. Remarkable stability and simplicity are realized in producing high‐resolution copper microstructures, demonstrating an acceptable degree of variability in insulating substrates and promising applications in integrated microsystems.
materials science, multidisciplinary