Abstract:In this work, the effect of Co addition on the solidification velocity, hardness and refined structure trans-formation of the undercooled Ni-Cu-Co alloys have been systematically investigated. The results show that the grain refinement of Ni-Cu-Co ternary alloys at low undercooling is caused by the intense dendrite remelting. However, the grain refinement at high undercooling is attributed to recrystallization, and the driving force of recrystallization comes from the stresses and plastic strains accumulated by the interaction between liquid flow induced by rapid solidification and primary dendrites. The Co addition can significantly increase the solidification velocity and recalescence effect of Ni-Cu-Co alloys by increasing the number of solidified crystal nucleus and solute diffusion velocity. Under the same undercooling level, the increase of solidification velocity and recalescence effect have strengthened the remelting effect and stress accumu-lation, which can enlarge the critical range for grain refinement gradually. Meanwhile, due to the significant improvement of solidification velocity and stress-induced deformation effect by Co addition, the low angle GBs in the refined structure of Ni-Cu-Co alloys increase and the grain size decreases significantly, which have significantly improved the average hardness of the refined structure. When Co addition reaches 6 %, the refined structures can appear in almost the whole undercooling range and the hardness are improved by more than 100 % compared with the as-cast structure.(c) 2022 Elsevier B.V. All rights reserved.

Enhanced mechanical properties of a CoCrFeNi high entropy alloy by supercooling method

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Microstructure Refinement Mechanism of Undercooled Cu55Ni45 Alloys

Solidification Microstructure in a Supercooled Binary Alloy

Grain Refinement Mechanism at High Undercooling of Ni80Cu20 Alloy

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Microstructural features and excellent compression properties of a novel Al0.7CoCrFeNiTi0.3 high entropy alloy

Microstructure and Mechanical Properties of Ultrafine Grained CoCrFeNi and CoCrFeNiAl0.3 High Entropy Alloys Reinforced with Cr2O3/Al2O3 Nanoparticles

Effect of Thermomechanical Processing on Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Enhanced tensile properties and wear resistance of additively manufactured CoCrFeMnNi high-entropy alloy at cryogenic temperature

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of CoCrFeNiNb0.2Mo0.2 High Entropy Alloy

Superior Low Temperature Mechanical Properties and Microstructure of (nicocr)95v5 Medium Entropy Alloy

Effect of partial recrystallization on microstructure and tensile properties of NiFeCoCrMn high-entropy alloy

Formation of core–shell structure in immiscible CoCrCuFe1.5Ni0.5 high-entropy alloy

Contribution of coherent precipitates on mechanical properties of CoCrFeNiTi 0.2 high-entropy alloy at room and cryogenic temperatures

Investigation on nonequilibrium crystallization of highly undercooled Cu–Ni–Co alloys

Effect of Heat Treatment on Microstructure and Properties of CoCrFeMnNi-5％Mo High Entropy Alloy

Mechanical properties of Al–Co–Cr–Fe–Ni high-entropy alloy: A molecular dynamics simulation