Abstract:Next generation implantable neural interfaces are targeting devices with mm-scale form factors that are freely floating and completely wireless. Scalability to more recording (or stimulation) channels will be achieved through distributing multiple devices, instead of the current approach that uses a single centralized implant wired to individual electrodes or arrays. In this way, challenges associated with tethers, micromotion, and reliability of wiring is mitigated. This concept is now being applied to both central and peripheral nervous system interfaces. One key requirement, however, is to maximize specific absorption rate (SAR) constrained achievable wireless power transfer efficiency (PTE) of these inductive links with mm-sized receivers. Chip-scale coil structures for microsystem integration that can provide efficient near-field coupling are investigated. We develop near-optimal geometries for three specific coil structures: in-CMOS, above-CMOS (planar coil post-fabricated on a substrate), and around-CMOS (helical wirewound coil around substrate). We develop analytical and simulation models that have been validated in air and biological tissues by fabrications and experimental measurements. Specifically, we prototype structures that are constrained to a 4 mm 4 mm silicon substrate, i.e., the planar in-/above-CMOS coils have outer diameters 4 mm, whereas the around-CMOS coil has an inner diameter of 4 mm. The in-CMOS and above-CMOS coils have metal film thicknesses of 3- m aluminium and 25- m gold, respectively, whereas the around-CMOS coil is fabricated by winding a 25-m gold bonding wire around the substrate. The measured quality factors (Q) of the mm-scale Rx coils are 10.5 @450.3 MHz (in-CMOS), 24.61 @85 MHz (above-CMOS), and 26.23 @283 MHz (around-CMOS). Also, PTE of 2-coil links based on three types of chip-scale coils is measured in air and tissue environment to demonstrate tissue loss for bio-implants. The SAR-constrained maximum PTE measured (together with resonant frequencies, in tissue) are 1.64% @355.8 MHz (in-CMOS), 2.09% @82.9 MHz (above-CMOS), and 3.05% @318.8 MHz (around-CMOS).

3-Coil Resonance Structure Wireless Power Transfer for 5kv Implantable Device

A study of the self-coupling magnetic resonance coupled wireless power transfer

Design of High Efficiency Planar Spiral Coil for Implantable Wireless Power Transfer Systems

Reconfigurable Resonant Topology Linking Two-, Three-, and Four-Coil Modes for WPT with Large Coupling Range and Fixed Frequency

Wireless Energy Transfer System Based On High Q Flexible Planar-Litz Mems Coils

A Study of Wireless Power Transfer for Implantable Devices by Using Wearable Devices

Wireless energy transfer system based on 3D wearable litz double coils

Wireless magnetic resonant energy transfer system based on micro 3D flexible MEMS Litz coils

Wireless Power Transmission Equipment Used For Implantable Cardiac Pacemakers

Optimization of the Coupling Coefficient of the Inductive Link for Wireless Power Transfer to Biomedical Implants

Research on dual‐coupled wireless power transfer system for cardiac pacemaker based on integrated coils

Omnidirectional Wireless Power Transfer for Millimetric Magnetoelectric Biomedical Implants

Wireless Power Transmission with Uniform Power Delivery in the 3D Space of the Human Body using Resonators in Parallel

Chip-Scale Coils for Millimeter-Sized Bio-Implants

A transcutaneous energy transmission system for artificial heart adapting to changing impedance.

Quantitative Analysis of System Efficiency and Output Power of Four-Coil Resonant Wireless Power Transfer

A Novel Hybrid Coil Design and Implementation for Wireless Power Transfer Systems

Multi-Resonator Wireless Inductive Power Link for Wearables on the 2D Surface and Implants in 3D Space of the Human Body

Design a Wireless Power Transfer System with Variable Gap Applied to Left Ventricular Assist Devices

Simulative and Experimental Research on Wireless Power Transmission Technique in Implantable Medical Device

A Novel Wireless Power Transfer System With Two Parallel Opposed Coils For Gastrointestinal Capsule Robot