Abstract:We present a numerical study of metals dynamics evaporated through resistively heated ovens in electron cyclotron resonance (ECR) plasma traps, used as metal ion beam injectors for accelerators and multi-disciplinary research in plasma physics. We use complementary numerical methods to perform calculations in the framework of the PANDORA trap. The diffusion and deposition of metal vapours at the plasma chamber's surface are explored under molecular flow regime, with stationary and time-dependent particle fluid calculations via COMSOL Multiphysics®. The ionisation of vapours is then studied in the strongly energised ECR plasma. We have developed a Monte Carlo (MC) code to simulate the in-plasma metal ions' dynamics, coupled to particle-in-cell simulations of the plasma physics in the trap. The presence of strongly inhomogeneous plasmas leads to charge-exchange and electron-impact ionisations of metals, in turn affecting the deposition rate/pattern of the metal on the walls of the trap. Results show how vapours dynamics depends both on evaporated metals and the plasma target. The 134Cs, 176Lu, and 48Ca isotopes were investigated, the first two being radioisotopes interesting for the PANDORA project, and the third as one of the most required rare isotope by the nuclear physics community. We present an application of the study: MC computing the γ activity due to the deposited radioactive neutral nuclei during the measurement time, we quantitatively estimated the overall γ-detection system's efficiency using GEANT4, including the poisoning γ-signal from the walls of the trap, relevant for the γ-tagging of short-lived nuclei's decay rate in the PANDORA experiment. This work can give valuable support both to the evaporation technique and plasma source optimisation, for improving the metal ion beam production, avoiding huge deposit/waste of metals known to affect the long-term source stability, as well as for radio-safety aspects and reducing material waste in case of rare isotopes.

The Difference Between the Metal Ion Extracted for the R.F. Ion Source by Applying Plasma Chemistry Reaction and by Non-Plasma Range Chemistry Reaction

A Novel Method to Generate Multicomponent Metal Ions by Anodic and Cathodic Vacuum Arc Plasmas with Pure Electrodes

Study of Ion Extraction from Laser-Induced Air Plasma

Experimental study on plasma characteristics in the extraction region of a high-power RF negative ion source based on electrostatic probe

Experimental Study on Ion Extraction Process by Electrostatic Field Between Two Parallel Plates with Adjustable Distance

Study on Separation of Rhenium, a Surrogate Element of Fissiogenic Technetium, from Aqueous Matrices Using Ion-Selective Extraction Chromatographic Resins

On Optimization of the Metal Ion Production by Electron Cyclotron Resonance Ion Sources

Ions Extraction and Collection Using the RF Resonance Method and Taking into Consideration the Sputtering Loss

Ion injection into EBIT with a miniature MEVVA ion sourse

Influence of Extraction Voltage on Electron and Ion Behavior Characteristics

Metal evaporation dynamics in electron cyclotron resonance ion sources: plasma role in the atom diffusion, ionisation, and transport

The Influence of Magnetic Field Configuration on an Electron Cyclotron Resonance Ion Source

Emulsion liquid membrane technique for optimal separation of Ni (II) and Sm (III) using response surface methodology and Box–Behnken experimental setup

Two-Phase Aqueous Extraction of Chromium and Its Application to Speciation Analysis of Chromium in Plasma

Rhenium extraction from dilute solution by precipitation flotation and oxidative volatilization techniques

Theoretical Analysis and Case Studies of One-Dimensional Ion Extraction Processes

Extraction of negative hydrogen ions using a plasma electrode covered by Ta or Ti

An experimental investigation of the proton fraction in a three electrode 2.45 GHz ECR ion source

RF-driven Ion Source Used in an Electrostatic Accelerator and Its Extracting Properties

One-dimension Modeling on Parallel-plate Ion Extraction Process Based on Electron-equilibrium Fluid Model

Modified Miniature Metal Vapor Vacuum Arc Source for the Shanghai Electron Beam Ion Trap