Abstract:Direct extraction of Ni(II) from Fe(III), Al(III), Ca(II), Mg(II), and Mn(II) is a bottleneck issue in the hydrometallurgy processes of laterite-nickel ore, spent batteries, and other secondary sources. One of the biggest challenges in achieving direct extraction of Ni(II) is the lack of stable and efficient extractants. Hence, a novel bipyridine extractant MSL211 was designed and synthesized in this paper. With its strong steric resistance and electrostatic interaction, MSL211 can form a stable eight-membered chelating ring with Ni(II), thereby having a high bonding ability toward Ni(II). Therefore, based on the high bonding ability of MSL211 toward Ni(II) and the low extraction capacity of DNNSA for Fe(III), an efficient synergistic extraction system of DNNSA-MSL211 was proposed. The synergistic extraction system of DNNSA-MSL211 realizes direct extraction of Ni(II) from Fe(III), Al(III), Ca(II), Mg(II), and Mn(II) without neutralization, precipitation, and solid/liquid separation processes, which are inevitable but problematic processes in the current hydrometallurgy processes for removing Fe(III), Al(III), and Mn(II). The effects of the molar ratios of DNNSA:MSL211, shaking time, temperature, O/A ratios, and equilibrium pH on the extraction behavior of Ni(II) were investigated. Under optimum conditions, the extraction efficiency of Ni(II) was as high as 97.62%, and the separation coefficient of Ni(II) over all impurities was greater than 400. To elucidate the mechanism of the high selectivity of DNNSA-MSL211 toward Ni(II), DFT calculations were carried out to calculate the binding energy (Delta E) and Gibbs free energy (Delta G(ext)) of the extraction process. Furthermore, this paper investigated the entire '' extraction-stripping '' process, demonstrating that the synergistic extraction system of DNNSA-MSL211 avoids neutralization, precipitation, and solid/liquid separation processes, minimizes hazardous waste generation, and shortens process flow while meeting the objectives of sustainable and clean production.

Emulsion liquid membrane technique for optimal separation of Ni (II) and Sm (III) using response surface methodology and Box–Behnken experimental setup

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Extraction and Separation of Metal Ions by a Column Packed with Polystyrene Microcapsules Containing Aliquat 336

Performance of an Emulsion Nanofluid Membrane for the Extraction of Antimony Heavy Metal: Experimental and Numerical Investigation

Extraction of Metal Ions by ELM Separation Technology

Recovery of Manganese Ions from Aqueous Solutions with Cyanex 272 Using Emulsion Liquid Membrane Technique: A Design of Experiment Study

LiNO 3 -assisted electrochemical extraction of metallic Sm from a molecular liquid-based electrolyte

Separation of Chromium (VI), Copper and Zinc: Chemistry of Transport of Metal Ions across Supported Liquid Membrane

Selective separation of cadmium(II), copper(II) and nickel(II) ions from electroplating wastewater using dual flat sheet supported liquid membrane

Efficient Extraction of Precious Metal Ions by a Membrane Emulsification Circulation Extractor

A simulation study of an electro-membrane extraction for enhancement of the ion transport via tailoring the electrostatic properties

Process Optimization Using Box‐Behnken Design for the Solvent Extraction and Separation of Iron, Cobalt, and Nickel from Simulated Crud Solution

Separation of Cobalt and Nickel from Wastewater by P-204 Microemulsion Saponified

Separation of Magnesium Impurity from Nickel and Cobalt Mixtures Using Ethylenediaminetetraacetic Acid and Temperature Optimization

Optimal Extraction and Separation of Europium and Samarium from Nitrate Medium Using Binary Mixture of Cyanex 572 and Tertiary Amine Extractants

Efficient Separation of Re (VII) and Mo (VI) by Extraction Using E-1006–Ammonium Sulfate Aqueous Two-Phase System

Efficient removal of heavy metals from aqueous solutions using ion flotation technique

Solvent Extraction Studies of Sm(III) from Nitrate Medium and Separation Factors of Rare Earth Elements with Mixtures of Sec‐octylphenoxyacetic Acid and 1,10‐Phenthroline

Bifunctional hydrophobic deep eutectic solvents for selective recovery of Sm and Co from waste SmCo permanent magnets

Direct Extraction of Ni(II) from Acidic Polymetallic Sulfate Media with a Novel Synergistic Extraction System of DNNSA-MSL211

Efficient extraction of heavy metals from aqueous environments using magnetic effervescent Tablet-Assisted ionic Liquid-Based dispersive Solid-Phase microextraction