Abstract:For in situ calibration of high numerical aperture wavefront sensor, a small pinhole, whose diameter should be less than the diffraction limit of incident beam, is used to generate reference spherical wavefront. In this way, the calibration accuracy is determined by the quality of pinhole diffracted quasi-spherical wavefront. Combining scalar and vector diffraction theory, a pinhole diffraction model is established to determine the pinhole parameters which could generate high quality quasi-spherical wavefront. The model includes three steps. Firstly, scalar diffraction theory is utilized to propagate light from exit pupil of test optics to the pinhole's incident near-field. Secondly, vector diffraction theory is used to propagate light from pinhole's incident near-field to the pinhole's emergent near-field. Finally, scalar diffraction theory is utilized again to propagate light from pinhole's emergent near-field to the detection plane of wavefront sensor. The most important feature of this model is that the influence of test optics' exit pupil aberrations on the quality of reference spherical wavefront can be taken into account quantitively. Based on the modeling approach above, we conduct a simulation on the pinhole diffraction behavior of light with wavelength of 193.3 nm, X-polarized, numerical aperture of 0.75. The results show that, in order to achieve reference spherical wavefront error of 2 m lambda rms, pinhole mask made up of Chromium membrane with pinhole diameter of 170 nm and membrane thickness of 200 nm should be chosen. At the same time, the pinhole lateral alignment, pinhole sidewall and pinhole eclipse should be controlled in +/-20 nm, +/-30 nm and +/-10 nm, respectively. Also the requirement on the exit pupil aberrations of test optics is given based on wavefront error and intensity uniformity on detection plane.

Effect of Illumination Parameters on the Quality of Wavefront Diffracted by Pinhole

Influence of Aberrations and Numerical Aperture of an Illumination Microscope Objective on the Quality of Pinhole Diffraction Wave Front

Wavefront Analysis Method of Pinhole Point-Diffraction Based on Waveguide Theory

Characterization of the Pinhole Diffraction Based on the Waveguide Effect in a Point Diffraction Interferometer

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Vector Simulation Of Pinhole Diffraction Behavior For High Numerical Aperture Converging Incident Beam At Deep Ultraviolet Wavelength

Interferometry Measurement Of Parallel Optical Plate Wavefront

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Diffraction Wavefront Analysis Of Point Diffraction Interferometer For Measurement Of Aspherical Surface

Point Diffraction Interferometer Based on a Silicon Nitride Waveguide Spherical Wave Source

Analysis of the Pinhole Array Illumination Source for High Precision Wavefront Error Metrology

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Error Analysis of Spherical Scanning Mechanism Used for Surface Defects Detection

Description and implementation studies on field dependent wavefront aberration

Diffraction Intensity Distribution of Pinhole for Misaligned Gaussian Beam Incidence

A Study of the Impact on Telecentricity to the Illumination System Based on Ccd Imaging

Wavefront-aberration Measurement and Systematic-Error Analysis of a High Numerical-Aperture Objective

Analysis of the Effects on Ultra-Short Laser Pulse Beam Quality Caused by Errors in Optical Systems

Wavefront Spacing and Gouy Phase in Presence of Primary Spherical Aberration.

Numerical Simulation and Experimental Research of Using Spherical Reference Wavefront to Test Aspheric Surface