Abstract:As a novel high-entropy ceramic material with a multi-cation and multi-anion sublattice structure, high-entropy carbonitride ceramics (HECNs) have exhibited outstanding comprehensive properties and attracted increasing attention. In this study, a new WC-based cemented carbide material reinforced by high-entropy carbonitride (Ti 0.2 W 0.2 Mo 0.2 V 0.2 Nb 0.2 )(C 0.7 N 0.3 ) (marked as HECN) was successfully fabricated by vacuum hot-pressed sintering. The mutual constraints between hardness and fracture toughness in extant WC-Co cemented carbide tool materials and their deficient high-temperature mechanical properties were effectively addressed. Moreover, for the low efficiency of the traditional carbothermal reduction nitridation, a novel method for rapidly preparing HECN powder was firstly proposed, namely the microwave-assisted carbothermal reduction nitridation, which could accelerate the heating rate and shorten the holding time. Single-phase HECN powder was successfully synthesized by this method, and the impacts of varying HECN content on the room and high-temperature mechanical properties of WC-based cemented carbide were investigated combined with the microstructure analysis by XRD\SEM. The results revealed that HECN effectively inhibited the grain growth of WC in cemented carbide, and the refined WC grains provided a high-volume fraction of grain boundaries, which prevented dislocation movement and increased the hardness. With the optimized HECN content of 10 wt%, the Vickers hardness and fracture toughness of WC-HECN-Co composite reached 21.58 ± 0.36 GPa and 12.27 ± 1.17 MPa∙m 1/2 respectively. Furthermore, WC-10HECN-10Co composites possessed outstanding high-temperature hardness and maintained a high hardness value of 13.16 ± 0.30 GPa at 800 °C, 37% higher than that of WC-10Co. The findings of this research hold significant practical implications for applying cemented carbide cutting tools in high-speed dry cutting.

Cemented Tungsten Carbide Hardmetal-An Introduction

Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance

WC-Based Cemented Carbides with High Entropy Alloyed Binders: A Review

Additive manufacturing of WC-Co cemented carbides: process, microstructure, and mechanical properties

Preparation, properties and microstructure of high hardness WC-co cemented carbide tool materials for ultra-precision machining

A review of cemented carbides for rock drilling: An old but still tough challenge in geo-engineering

Faceting/Roughening of WC/Binder Interfaces in Cemented Carbides: A Review

High-performance WC-AlCoCrFeNi 2.1 cemented carbides fabricated by resistance seam additive manufacturing

Nanostructural Effects Beyond Hall-Petch: Towards Superhard Tungsten Carbide

Fabrication of Hard Cermets by In-Situ Synthesis and Infiltration of Metal Melts into WC Powder Compacts

Role of the microstructure and the residual strains on the mechanical properties of cast tungsten carbide produced by different methods

Printability and Properties of Tungsten Cemented Carbide Produced Using Laser Powder Bed Fusion Additive Manufacturing with Ti As a Binder

Microstructure and properties of coarse WC-10CoCrFeMnNi cemented carbide by mechanical alloying and hot pressing sintering

Study on the rapid synthesis of high-entropy carbonitride powder and its remarkable hardening effects on cemented carbide tool materials

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Cemented carbide microstructures: a review

Microstructures and Properties of a Novel Cemented Carbide Prepared Using a Co–Ni–Cu Multiprincipal Element Alloy As the Binder

Microstructure and mechanical properties of WC–Co-based cemented carbide with bimodal WC grain size distribution

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

Study on Effect of High-Entropy Alloy Binder on Microstructure and Properties of WC Cemented Carbide Doped with Rare Earth Oxide

Fracture behavior of cemented carbides with CoNiFe medium entropy alloy binder