Abstract:This article presents a resolution-tunable time-to-digital converter (TDC) with a three-level structure, in which the low-level TDC employs an improved all-digital delay-locked loop (ADDLL) based on a cyclic pulse ring oscillator (CPRO) and a digital controller for detection lock state (DLS). Specifically, a bidirectional bypass transmission delay unit (BBTDU) in CPRO provides adjustable resolution with a 15 ps coarse delay step and a 3.5 ps fine delay step. Second, a data processing approach is presented to open the window to extract a 4-bit binary data of the bidirectional serial shift register line (BSSRL) in ADDLL for DLS and update the values of BSSRL at the same position of windowing, which can reduce the number of manipulated registers in BSSRL by approximately 93.7%. Then, a methodology of detecting the locking pattern between lock and unlock and selecting the fixed optimal windowing sequence to update the controlling values of BSSRL is proposed to eliminate dithering in a locked state, which can reduce the clock phase jitter when locked. Finally, the proposed TDC has been integrated into a system-on-chip (SoC) and fabricated in 65-nm CMOS technology. The measurement results implemented with a 30 MHz reference clock demonstrate that a resolution-tunable TDC with low power has been obtained. There are six configurable resolutions in all. When configured to a minimum resolution of 7.78 ps, the power consumption and the precision are 4.812 mW and 3.02 ps, respectively. While configured for a maximum resolution of 29.7 ps, the power consumption and the precision are 2.874 mW and 13.2 ps, respectively. The proposed TDC is extremely flexible and well-suited for integration into other large-scale application-specific integrated circuit (ASIC) chips to extend the application range, especially for low-frequency applications.

A low-power, area-efficient all-digital delay-locked loop for DDR3 SDRAM controller

A Low Power and Small Area All Digital Delay-Locked Loop Based on Ring Oscillator Architecture

A 2.5GHz ADPLL with PVT-insensitive ΔΣ dithered time-to-digital conversion by utilizing an ADDLL.

An evenly-spaced-phase all-digital DLL using dual-loop SAR control

A 2.5ghz Adpll With Pvt-Insensitive Delta Sigma Dithered Time-To-Digital Conversion By Utilizing An Addll

A Low-Jitter Harmonic-Free All-Digital Delay-Locked Loop for Multi-Channel Vernier TDC

A shared TDC-based fast-lock all-digital DLL using a DCC-embedded delay line

Design and Implementation of DDR3 SDRAM Controller

A Novel Delay Manager Based on Digital DLL Used to Adjust the Delay Time of FPGA's IO Cell

A Resolution-Tunable Low Power Time-to-Digital Converter With an Improved ADDLL Based on a Cyclic Pulse Ring Oscillator

A PLL/DLL Based CDR with ΔΣ Frequency Tracking and Low Algorithmic Jitter Generation

266–2133 MHz phase shifter using all‐digital delay‐locked loop and triangular‐modulated phase interpolator for LPDDR4X interface

A Fractional- N DTC-based ADPLL using path-select multi-delay line TDC and true fractional division technique

A Low Jitter Current-Mode Multiplying Delay-Locked Loop Applied to High-Precision TDC

A Low Power All-Digital Frequency Locked Loop with Resource-Efficient Frequency Detector and Hysteresis Lock Detector

An Asynchronous Delay Line TDC for ADPLL in 0.13um CMOS.

A Novel Digital DLL and Its Implement on the FPGA.

Design and Analysis of A Modified Digitally Controlled Programmable Delay Element

A Low-Power and High-Frequency Phase Frequency Detector for a 3.33-GHz Delay Locked Loop

A Novel Digital Loop Filter with Frequency Error Prediction for Fast-Locking Bang-Bang ADPLL

An Analog Delay-Locked Loop with Digital Coarse Lock Incorporating Error Compensation for Fast and Robust Locking