Abstract:This paper presents advancements in the performance of digital phase-locked loop (DPLL)s, with a special focus on addressing the issue of required gain calibration in the time-to-digital converter (TDC) within phase-domain DPLL structures. Phase-domain DPLLs are preferred for their simplicity in implementation and for eliminating the delta–sigma modulator (DSM) noise inherent in conventional fractional-N designs. However, this advantage is countered by the critical need to calibrate the gain of the TDC. The previously proposed dual-interpolated TDC(DI-TDC) was proposed as a solution to this problem, but strong spurs were still generated due to the TDC resolution, which easily became non-uniform due to PVT variation, degrading performance. To overcome these problems, this work proposes a DPLL with a new calibration system that ensures consistent TDC resolution matching the period of the digitally controlled oscillator (DCO) and operating in both the foreground and background, thereby maintaining consistent performance despite PVT variations. This study proposes a DPLL using a calibrated dual-interpolated TDC that effectively compensates for PVT variations and improves the stability and performance of the DPLL. The PLL was fabricated in a 28-nm CMOS process with an active area of only 0.019 mm2, achieving an integrated phase noise (IPN) performance of −17.5 dBc, integrated from 10 kHz to 10 MHz at a PLL output of 570 MHz and −20.5 dBc at 1.1 GHz. This PLL operates within an output frequency range of 475 MHz to 1.1 GHz. Under typical operating conditions, it consumes only 930 μW with a 1.0 V supply.

266–2133 MHz phase shifter using all‐digital delay‐locked loop and triangular‐modulated phase interpolator for LPDDR4X interface

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

A 4224 MHz Low Jitter Phase-Locked Loop in 0.13-Μm CMOS Technology

A 5.4 GHZ All-Digital Phase-Locked Loop with a wide output swing and high-linearity DAC

A 0.4-Ps-jitter −52-Dbc-spur Synthesizable Injection-Locked PLL with Self-Clocked Nonoverlap Update and Slope-Balanced Subsampling BBPD

An evenly-spaced-phase all-digital DLL using dual-loop SAR control

A shared TDC-based fast-lock all-digital DLL using a DCC-embedded delay line

A PLL/DLL Based CDR with ΔΣ Frequency Tracking and Low Algorithmic Jitter Generation

An 11.1-to-14.9ghz Digital-Integral Hybrid-Proportional Fractional-N PLL with an LC DTC Achieving 0.52μs Locking Time and 41.3f5 Jitter

A low-power, area-efficient all-digital delay-locked loop for DDR3 SDRAM controller

A 2.4-Ghz Sub-Sampling PLL with an Adaptive and No Power Contribution FLL Achieving 103.58 Fs Rms Jitter and −257.8 Db FOM

A 2.5GHz ADPLL with PVT-insensitive ΔΣ dithered time-to-digital conversion by utilizing an ADDLL.

A 8.5 GHz phase locked loop with split-load divider

A 21.8-41.6Ghz Fast-Locking Sub-Sampling PLL with Dead Zone Automatic Controller Achieving 62.7-Fs Jitter and −250.3db FoM

A 56-GHz Fractional-N PLL With 110-fs Jitter

A 3.3-4.5GHz Fractional-N Sampling PLL with A Merged Constant Slope DTC and Sampling PD in 40nm CMOS

A Fully Synthesizable Fractional-N Digital Phase-Locked Loop with a Calibrated Dual-Referenced Interpolating Time-to-Digital Converter to Compensate for Process–Voltage–Temperature Variations

A Fractional- N DTC-based ADPLL using path-select multi-delay line TDC and true fractional division technique

Delay-locked Loop Based Frequency Quadrupler with Wide Operating Range and Fast Locking Characteristics