Abstract:The present study proposes and experimentally verifies a refractive index (RI) sensor with high sensitivity and simple structure based on multimode Mach-Zehnder interference (MZI), in which a suspend-core fiber (SCF) fused with single-mode fibers (SMFs) at both ends worked as the sensing unit. Femtosecond laser is used to process SCF, forming microfluidic channels for liquid in and out, and then encapsulation is conducted to enhance mechanical characteristics of the MZI sensor. By analyzing simulation and experimental results, it has been confirmed that the multimode MZI arises from the effective RI difference between the fundamental mode and the higher-order modes of the SCF core induced by RI variations of external environment. This study involves the preparation and testing of three sensors with varying SCF lengths. As the external RI varies in range of 1.3333 to 1.3472, all sensors exhibit sensitivities at a comparable level. This observation aligns well with the theoretical analysis, indicating that fiber length does not have direct impact on the sensing performance. The maximum sensitivity was 1825.41 nm/RIU. The three sensors undergo tests to assess their repeatability and stability, revealing a maximum wavelength error of 0.1975 nm for repeatability and 0.18 nm for stability. In addition, the temperature sensitivity within the range of 20-100 °C is found to be as low as 0.00667 nm/°C, indicating that the potential impact of temperature-induced wavelength shift can be disregarded. The sensor exhibits high sensitivity, excellent repeatability and stability, promising extensive application in diverse fields including biology, chemistry, medicine, and environmental monitoring.

Enhanced Ri Sensor Using A Combination Of A Long Period Fiber Grating And A Small Core Singlemode Fiber (Scsmf) Structure

Enhanced Refractive Index Sensor Using a Combination of a Long Period Fiber Grating and a Small Core Singlemode Fiber Structure

Highly Sensitive RI Sensor Based on a D-shaped Single-Mode-graded-index Multimode-Single-mode Fiber Structure

Fiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure.

Hybrid Long-Period Fiber Grating with Multimode Fiber Core for Refractive Index Measurement

An Ultrasensitive Long-Period Fiber Grating-Based Refractive Index Sensor With Long Wavelengths

Sectional Sensitivity in RI Sensor During Mode Transition with Regenerative Cladding Layer

Numerical and Experimental Analysis of Sensitivity-Enhanced RI Sensor Based on Ex-TFG in Thin Cladding Fiber

A Reflective Fiber-Optic Refractive Index Sensor Based on Multimode Interference in A Coreless Silica Fiber

Enhanced Refractometer Based on Periodically Tapered Small Core Singlemode Fiber

High Sensitivity Refractive Index Sensor Based on a Tapered Small Core Single-Mode Fiber Structure.

A High Sensitivity Refractometer Based on A Tapered Scsmf Structure and Its Application to Biosensing

Investigation of the high sensitivity RI sensor based on SMS fiber structure

SMF Taper Evanescent Field-Based RI Sensor Combined with Fiber Loop Ring Down Technology

Highly Sensitive Refractive Index Sensor Based on Two Cascaded Long Period Gratings with Rotary Refractive Index Modulation

Refractive Index Sensors Based on a Chirped Core Long-Period Fiber Grating

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

Investigation of a D-Shaped Plastic Optical Fiber Assisted by a Long Period Grating for Refractive Index Sensing

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Phase-shifting Multimode FLRD Technique with MSM Structure for RI Measurement

A Simple High-Sensitivity Sensor Based on Multimode Mach-Zehnder Interference for Refractive Index Measurement