Abstract:Long-period fiber grating based refractometers have attracted great attention for various applications, but they usually suffer from the cross sensitivity to temperature in practice. Here, we demonstrate a temperature-insensitive refractive index sensor based on a short-line long-period fiber grating (SL-LPFG). It is fabricated by using femtosecond laser to periodically inscribe short lines in a standard single-mode fiber (SMF) with a small duty cycle of 0.3, and resonates to a cladding mode with a high diffraction order. This high-order-resonance SL-LPFG responds to ambient refractive index with the sensitivities of 175.84 nm/RIU and 367.63 nm/RIU in the ranges of 1.3381 to 1.3763 and 1.3763 to 1.4008, respectively. Meanwhile, it presents a temperature sensitivity as low as 4.0 pm/°C, which is almost one percent of the temperature sensitivity of the similar period LPFG fabricated by UV exposure method. It's significant for LPFG-based refractometers in normal SMFs to minimize thermal interference without the assistance of an additional sensing unit and matrix interrogation. Therefore, the proposed high-order-resonance SL-LPFG provides a high-performance and low-cost solution for refractive index related applications, especially in medical, chemical, and biological fields.

Highly Sensitive Refractive Index Sensor Based on Two Cascaded Long Period Gratings with Rotary Refractive Index Modulation

Optofluidic Refractive Index Sensor Based on Partial Reflection

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

High Sensitivity Refractive Index Sensor Based on the Cascaded Long-Period Fiber Grating near the Dispersion Turning Point

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Refractive Index Sensors Based on a Chirped Core Long-Period Fiber Grating

High Resolution Refractive Index Sensing with Dual-Wavelength Fiber Laser

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Compact refractive index sensor based on offset splicing long-period fiber grating

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

High Sensitive Refractive Index Sensor Based on Dispersion Turning Point Long-Period Fiber Gratings in Tapered Fiber

High-sensitivity sensor design based on cascaded long-period fiber grating with film coating

Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitivity Measurement of Refractive Index