Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Cryogenic System with GM Cryocooler for Krypton, Xenon Separation from Hydrogen-Helium Purge Gas

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Cryogenic-temperature Thermoacoustically Driven Pulse Tube Refrigerator

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Design and Construction of A Cryogenic Distillation Device for Removal of Krypton for Liquid Xenon Dark Matter Detectors

Design, construction and commissioning of a high-flow radon removal system for XENONnT

Experimental Analysis of PandaX-4T Cryogenic Distillation System for Removing Krypton from Xenon

Design and Commissioning of the PandaX-4T Cryogenic Distillation System for Krypton and Radon Removal

A Cryogen Recondensing Cooling System for Scientific Experiment in the Pulsed High Magnetic Field

Improvement of xenon purification system using a combination of a pulse tube refrigerator and a coaxial heat exchanger

Freezing-out of heavy isotopes of Kr

Cryogenic bath-type heat exchangers for ultra-pure noble gas applications

Design and Construction of a 1.8 K Superfluid 4he System with a G-M Cryocooler

Remote cryogenic helium gas circulating cooling system for a 10-Mvar class HTS dynamic synchronous condenser

A new cold cooling system using krypton for the future upgrade of the LHC after the long shutdown 4 (LS4)

Status of the Cryogenic System of the HL-2M Tokamak

Large scale xenon purification using cryogenic distillation for dark matter detectors

A Separated Two Stage Helium Liquefier Using a 4 K GM Cryocooler

A Xenon Condenser with a Remote Liquid Storage Vessel

Design of a Cryostat for Spectroscopic Investigation of All Hydrogen Isotopologues in the Solid, Liquid, and Gaseous Phases