Abstract:The PandaX-30T is a proposed next-generation experiment to study dark matter and neutrinos using a dual-phase time projection chamber with \textasciitilde30 tons of liquid xenon. An innovative xenon handling subsystem of the PandaX-30T, the First-X, is described in this paper. The First-X is developed to handle liquid xenon safely and efficiently, including liquefying and long-term storing xenon without losses or contamination, and transferring cryogenic liquid xenon between the storage module and the detector safely and effectively without venting out. The storage module of the First-X is five specially designed double-walled cylindrical vessels (Center Tanks) equipped with three heat exchangers each for pressure and temperature regulation. Each Center Tank is designed with a vacuum and multi-layer insulation and a maximum allowable working pressure of 7.1 MPa, allowing 6 tons of xenon to be stored at 165--178 K at 0.1--0.2 MPa in the liquid phase or up to 300 K and up to 6.95 MPa in the supercritical phase. High-pressure storage (\textgreater0.2 MPa) only occurs in case of long-term detector shutdown or lack of nitrogen, ensuring no-loss storage of 6 tons of xenon in the range 178--300 K. In this paper, the thermophysical performances of the First-X and innovative scenarios to conduct non-vented cryogen transportation were experimentally conducted and reported using liquid argon. The non-vented cryogenic liquid filling and pump-assisted cryogenic liquid recovery have been conducted with liquid argon at a mass flow rate of 1390 kg/h, corresponding to a xenon mass flow rate of 2140 kg/h. Compared with the PandaX-4T, the transportation of xenon between the detector and the storage module is conducted in the liquid phase rather than in the gaseous phase, and the filling rate and the recovery rate are increased by approximately 50 times and 30 times, respectively.

Experimental Analysis of PandaX-4T Cryogenic Distillation System for Removing Krypton from Xenon

Design and Commissioning of the PandaX-4T Cryogenic Distillation System for Krypton and Radon Removal

Radon Removal Commissioning of the PandaX-4T Cryogenic Distillation System

The Cryogenics and Xenon handling system for the PandaX-4T Experiment

Distillation of liquid xenon to remove krypton

Design, construction and commissioning of the PandaX-30T liquid xenon management system

Design and operation of the PandaX-4T high speed ultra-high purity xenon recuperation system

The cryogenic system for the Panda-X dark matter search experiment

Thermal Management Design and Key Technology Validation for PandaX Underground Experiment

PandaX: a Liquid Xenon Dark Matter Experiment at CJPL

Design, construction and commissioning of a high-flow radon removal system for XENONnT

A LN2-based cryogenic system prototype for future PandaX experiment

Low radioactive material screening and background control for the PandaX-4T experiment

The Design and Validation of a Zero Boil-Off LAr System for CDEX-10 Experiment

Online $^{222}$Rn removal by cryogenic distillation in the XENON100 experiment

Performance of a cryogenic system prototype for the XENON1T detector

Neutron-induced nuclear recoil background in the PandaX-4T experiment

PandaX-xT—A Deep Underground Multi-Ten-tonne Liquid Xenon Observatory

Detection of krypton in xenon for dark matter applications

PandaX-xT: a Multi-ten-tonne Liquid Xenon Observatory at the China Jinping Underground Laboratory

Cryogenic System of China Dark Matter Experiment (CDEX-10)