Abstract:Ni–Cu under-bump metallisation (UBM) can reduce stress and improve wetting ability in technology for electronic packaging technology advances with three-dimensional integrated circuit (3D IC) devices. The bond between the Sn-based solder and Ni–Cu UBM is affected by the formation of intermetallic compounds (IMCs), specifically Ni3Sn4 and (Ni,Cu)3Sn4. This paper investigates the mechanical properties of IMCs, which are critical in assessing the longevity of solder joints. First-principles calculations were carried out to investigate the phase stability, mechanical properties and electronic structures of Ni3Sn4, Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 IMCs. The calculated formation enthalpies show that the doping of Cu atoms leads to a decrease in the stability of the phases and a reduction in the mechanical properties of the Ni3Sn4 crystal structure. As the concentration of Cu atoms in the Ni3Sn4 cells increases, the bulk modulus values of (Ni,Cu)3Sn4 formed with different compositions decrease from 107.78 GPa to 87.84 GPa, the shear modulus decreases from 56.64 GPa to 45.08 GPa, and the elastic modulus decreases from 144.59 GPa to 115.48 GPa, indicating that the doping of Cu atoms into the Ni3Sn4 cells may adversely affect their mechanical properties and increase the possibility of microcracking at the interface during actual service. The anisotropy of (Ni,Cu)3Sn4 is more significant than that of Ni3Sn4, with Ni2.0Cu1.0Sn4 showing the highest anisotropy. After evaluating the electronic structures, the metallic properties of Ni3Sn4 and the Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 phases are revealed by electronic structure analysis. The total density of states (TDOS) for (Ni,Cu)3Sn4 structures is mainly influenced by Ni-d and Cu-d states. The addition of Cu atoms can increase the brittleness of Ni3Sn4. In addition, the region where d and p hybridisation occurs gradually increases with increasing Cu content. The electronic properties suggest that the binding energy between Ni and Sn atoms weakens with the addition of Cu atoms, resulting in a decrease in the elastic modulus. This research can serve as a valuable reference and theoretical guide for future applications of these materials.

Effects of additive elements on structural and electronic properties of Sn-based intermetallics by first principles

First-Principles Calculations Of Zn Substitutions In Cu(6)Sn5

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

First-principles Investigation of the Structural and Electronic Properties of Cu6−xNixSn5 (x=0, 1, 2) Intermetallic Compounds

First-Principles calculations of structural, thermodynamic and electronic properties of intermetallic compounds in solder

Effect of Ni and Pd Addition on Mechanical, Thermodynamic, and Electronic Properties of AuSn4-Based Intermetallics: A Density Functional Investigation

Influence on the mechanical properties and electronic structures of Cu-alloyed Ti 5 Sn 3 compounds from first-principles calculations

Synergistic Effects of Alloy Elements on the Structural Stability, Mechanical Properties and Electronic Structure of Ni3Sn4: Using First Principles

The Structural, Elastic, Electronic and Thermodynamic Properties of Hexagonal Η-Cu6−xnixsn5 (x = 0, 0.5, 1, 1.5 and 2) Intermetallic Compounds

Investigation of the Influence of Alloy Atomic Doping on the Properties of Cu-Sn Alloys Based on First Principles

Theoretical and experimental investigations on mechanical properties of (Fe,Ni)Sn2 intermetallic compounds formed in SnAgCu/Fe-Ni solder joints

Effect of transition-elements substitution on mechanical properties and electronic structures of B2-AlCu compounds

First-principles calculation of the effects of In doping on η-Cu 6 Sn 5 structure, elastic anisotropy, electronic properties and fracture toughness

Effect of intermetallic on electromigration and atomic diffusion in Cu/SnAg 3.0Cu 0.5/Cu joints: Experimental and first-principles study

Effects of 1.0% Zn or Ni Additions on Interfacial Reaction and Growth of Intermetallics in Sn-3. 5ag/cu Joint

Effect of in Addition on the Microstructure and Mechanical Properties of Sn-0.7Cu-0.8Zn/Cu Solder Joints

Effect of alloying elements (Ni, Co, Cr, and Sn) on the mechanical properties of W–Cu alloy system predicted from first principles

Effects of Cu Addition on Growth of Au-Sn Intermetallics at Sn-xCu/Au Interface During Aging Process

Designing Pu Intermetallics with First Principle Calculations

First-principles study of effects of alloying elements on Cu/γ-Fe interfacial properties

A first-principles study of the mechanical and physical properties of Ni 3 Sn x intermetallic compounds for high-temperature power device packaging