Abstract:Ni–Cu under-bump metallisation (UBM) can reduce stress and improve wetting ability in technology for electronic packaging technology advances with three-dimensional integrated circuit (3D IC) devices. The bond between the Sn-based solder and Ni–Cu UBM is affected by the formation of intermetallic compounds (IMCs), specifically Ni3Sn4 and (Ni,Cu)3Sn4. This paper investigates the mechanical properties of IMCs, which are critical in assessing the longevity of solder joints. First-principles calculations were carried out to investigate the phase stability, mechanical properties and electronic structures of Ni3Sn4, Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 IMCs. The calculated formation enthalpies show that the doping of Cu atoms leads to a decrease in the stability of the phases and a reduction in the mechanical properties of the Ni3Sn4 crystal structure. As the concentration of Cu atoms in the Ni3Sn4 cells increases, the bulk modulus values of (Ni,Cu)3Sn4 formed with different compositions decrease from 107.78 GPa to 87.84 GPa, the shear modulus decreases from 56.64 GPa to 45.08 GPa, and the elastic modulus decreases from 144.59 GPa to 115.48 GPa, indicating that the doping of Cu atoms into the Ni3Sn4 cells may adversely affect their mechanical properties and increase the possibility of microcracking at the interface during actual service. The anisotropy of (Ni,Cu)3Sn4 is more significant than that of Ni3Sn4, with Ni2.0Cu1.0Sn4 showing the highest anisotropy. After evaluating the electronic structures, the metallic properties of Ni3Sn4 and the Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 phases are revealed by electronic structure analysis. The total density of states (TDOS) for (Ni,Cu)3Sn4 structures is mainly influenced by Ni-d and Cu-d states. The addition of Cu atoms can increase the brittleness of Ni3Sn4. In addition, the region where d and p hybridisation occurs gradually increases with increasing Cu content. The electronic properties suggest that the binding energy between Ni and Sn atoms weakens with the addition of Cu atoms, resulting in a decrease in the elastic modulus. This research can serve as a valuable reference and theoretical guide for future applications of these materials.

Influence on the mechanical properties and electronic structures of Cu-alloyed Ti 5 Sn 3 compounds from first-principles calculations

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

Investigation of the Influence of Alloy Atomic Doping on the Properties of Cu-Sn Alloys Based on First Principles

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

Effect of alloying elements (Ni, Co, Cr, and Sn) on the mechanical properties of W–Cu alloy system predicted from first principles

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

First-Principles Calculations of the Mechanical Properties of Doped Cu3P Alloys

First-principles calculations of structural and elastic properties of Sn solid solution, Cu 6 Sn 5 and SnSb in tin-based bearing alloy

Effect of transition-elements substitution on mechanical properties and electronic structures of B2-AlCu compounds

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Effect of slight Sn modification on mechanical properties and corrosion behavior of Ti- (2–4 wt%) Mn alloys fabricated via powder metallurgy

The Structural, Elastic, Electronic and Thermodynamic Properties of Hexagonal Η-Cu6−xnixsn5 (x = 0, 0.5, 1, 1.5 and 2) Intermetallic Compounds

Modeling the effects of varying Ti concentration on the mechanical properties of Cu-Ti alloys

Mechanical And Thermodynamic Properties Of Mg17la2, La5si4 And La5sn3 Phases In Mg-Sn-Mn(Si)-La Alloy From First-Principles Calculations

First-Principles Calculations of Structural and Mechanical Properties of Cu–Ni Alloys

The Effect of Pressure on Phase Stability and Mechanical Properties of Ti‐xSn Alloys

First-principles calculation of the effects of In doping on η-Cu 6 Sn 5 structure, elastic anisotropy, electronic properties and fracture toughness

Effect of Ag Doping on Mechanical Properties of Cu6Sn5 Intermetallic Compounds

Enhanced strength-ductility synergy in CuSn alloy via tuning Ti content

First‐Principles Calculations for the Enhancement of Mechanical Properties of High‐Entropy Alloys by Carbon Elements

Structural, Elastic, and Electronic Properties of Al-Cu Intermetallics from First-Principles Calculations