Abstract:Ni–Cu under-bump metallisation (UBM) can reduce stress and improve wetting ability in technology for electronic packaging technology advances with three-dimensional integrated circuit (3D IC) devices. The bond between the Sn-based solder and Ni–Cu UBM is affected by the formation of intermetallic compounds (IMCs), specifically Ni3Sn4 and (Ni,Cu)3Sn4. This paper investigates the mechanical properties of IMCs, which are critical in assessing the longevity of solder joints. First-principles calculations were carried out to investigate the phase stability, mechanical properties and electronic structures of Ni3Sn4, Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 IMCs. The calculated formation enthalpies show that the doping of Cu atoms leads to a decrease in the stability of the phases and a reduction in the mechanical properties of the Ni3Sn4 crystal structure. As the concentration of Cu atoms in the Ni3Sn4 cells increases, the bulk modulus values of (Ni,Cu)3Sn4 formed with different compositions decrease from 107.78 GPa to 87.84 GPa, the shear modulus decreases from 56.64 GPa to 45.08 GPa, and the elastic modulus decreases from 144.59 GPa to 115.48 GPa, indicating that the doping of Cu atoms into the Ni3Sn4 cells may adversely affect their mechanical properties and increase the possibility of microcracking at the interface during actual service. The anisotropy of (Ni,Cu)3Sn4 is more significant than that of Ni3Sn4, with Ni2.0Cu1.0Sn4 showing the highest anisotropy. After evaluating the electronic structures, the metallic properties of Ni3Sn4 and the Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 phases are revealed by electronic structure analysis. The total density of states (TDOS) for (Ni,Cu)3Sn4 structures is mainly influenced by Ni-d and Cu-d states. The addition of Cu atoms can increase the brittleness of Ni3Sn4. In addition, the region where d and p hybridisation occurs gradually increases with increasing Cu content. The electronic properties suggest that the binding energy between Ni and Sn atoms weakens with the addition of Cu atoms, resulting in a decrease in the elastic modulus. This research can serve as a valuable reference and theoretical guide for future applications of these materials.

Effect of alloying elements (Ni, Co, Cr, and Sn) on the mechanical properties of W–Cu alloy system predicted from first principles

Investigation of the Influence of Alloy Atomic Doping on the Properties of Cu-Sn Alloys Based on First Principles

Effects of alloying elements on the electronic structure and ductility of NiAl compounds investigated by X-ray absorption fine structure

Influence on the mechanical properties and electronic structures of Cu-alloyed Ti 5 Sn 3 compounds from first-principles calculations

The Effects of Combining Alloying Elements on the Elastic Properties of Γ -Ni in Ni-based Superalloy: High-throughput First-Principles Calculations

Uncovering the influence mechanism of nonmetallic atoms on the mechanical properties of Ni 3 Co alloy

Interaction mechanism of elements and second phase characteristics in as-cast Cu–15Ni–8Sn–(1Al–0.1Y) alloy

Insight into the Influence of Alloying Elements on the Elastic Properties and Strengthening of Copper: A High-Throughput First-Principles Calculations

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

First‐Principles Calculations for the Enhancement of Mechanical Properties of High‐Entropy Alloys by Carbon Elements

Effect of alloying elements on interfacial properties and mechanical behavior of Mg/WC systems: A first-principles study

Design of Cu–Cr Alloys with High Strength and High Ductility Based on First-Principles Calculations

Alloying-element Dependence of Structural, Elastic and Electronic Properties of Nickel-Based Superalloys: Influence of Γ’ Volume Fraction

Effects of transition metals (Nb, Mo and Cd) and main group metals (In, Ge and Sb) on mechanical properties of Al 2 Cu: a first-principles study

Effects of Trace Elements on the Properties of Copper from First-principles Calculations

Synergistic Effects of Alloy Elements on the Structural Stability, Mechanical Properties and Electronic Structure of Ni3Sn4: Using First Principles

First-principles study of the effect of V, Co, Ca, Sr, Ga, As doping on the mechanical properties of Al2Cu

Effects of Cu on the high-entropy alloys of Cu x CoCrFeNi: Experiment and molecular dynamics simulations

First-principles study on the high-strength and high-conductivity modification mechanism of C7035 copper alloy by Ni, Si, and Co solid solution

First-Principles Calculations of the Mechanical Properties of Doped Cu3P Alloys

Effects of Cu on the High-Entropy Alloys of CuxCoCrFeNi: Experiment and Molecular Dynamics Simulations