Abstract:TiAl alloy has attracted significant attention as a candidate material with high melting temperature, low density, relatively high hardness and excellent corrosion resistance, good oxidation and creep resistance at high temperatures. The inherent brittleness at low temperatures is by far the greatest hurdle that prevents it from being widely used in industries. Doping has long been considered as an effective way to improve the performance of alloy. The properties of TiAl alloy are highly dependent on the third alloying element. Although the mechanical properties of TiAl alloy are improved to a certain extent by adjusting the composition, to date the physical mechanism has been still unclear. In this paper, from the microscopic electronic structure the influence of metal element X (X represents V, Nb, Ta, Cr, Mo and W) doping on the mechanical properties of TiAl alloy is studied by first-principle method. The first-principle calculations presented here are based on electronic density-functional theory framework. The ultrasoft pseudopotentials and a plane-wave basis set with a cut-off energy of 350.00 eV are used. The generalized gradient approximation refined by Perdew and Zunger is employed for determining the exchange-correlation energy. Brillouin zone is set to be within 888 k point mesh generated by the Monkhorst-Pack scheme. The self-consistent convergence of total energy is at 5.010-7 eV/atom. The supercell (222), (221) and (121) are selected as a computational model. According to the calculated structural parameters of the doped systems, we find that the lattice constant ratio c/a decreases with the increase of doping ratio, correspondingly the anisotropy of crystal reduces. The interactions between Ti and Al atoms are enhanced. Under the same pressure, the influences of doping concentration and type of doping element on volume are different. According to the obtained elastic constants, bulk moduli and shear moduli of doping systems, we find that with a doping concentration of 6.25%, Cr, Mo and W doping can improve the toughness of TiAl alloy more than V, Nb and Ta doping. For a doping concentration of 12.5%, the toughening effect of Mo is the strongest in all the six doping elements. The strong s-s, p-p and d-d electron interactions exist between the Ti and Mo atom, which is verified by the results of partial electron density of state and charge density. The strong interaction caused by doping restricts effectively the migration of Ti and Al atom. It is beneficial to enhance the stability and strength of the TiAl alloy. In summary, starting from the microscopic electronic structure we find that doping can effectively reduce the anisotropy of TiAl alloy, enhance the interaction between Ti and Al atoms, weaken covalent bond energy, enhance metal bond energy and then promote the plastic deformation of TiAl alloy. The results can provide theoretical support for improving the performances of TiAl based alloys.

Effects of transition metals (Nb, Mo and Cd) and main group metals (In, Ge and Sb) on mechanical properties of Al 2 Cu: a first-principles study

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

First-principles study of the effect of V, Co, Ca, Sr, Ga, As doping on the mechanical properties of Al2Cu

The Structural Stability and Mechanical Properties of Doped Al2Cu 2 Cu Precipitates with Different Elements by First-Principles Calculations

The Structural Stability and Mechanical Properties of Doped Al2Cu Precipitates with Different Elements by First-Principles Calculations

Effects of Transition Metal (cr, Mn, Mo, Ni, Ti, and V) Doping on the Mechanical, Electronic and Thermal Properties of Fe3Al

First-Principles Calculations of the Mechanical Properties of Doped Cu3P Alloys

Influence of Mg Doping on the Structure and Mechanical Properties of Al2Cu Precipitated Phase by First-Principles Calculations

Effect of transition-elements substitution on mechanical properties and electronic structures of B2-AlCu compounds

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Alloying Effects on the Phase Stability and Mechanical Properties of Doped Cu-Sn IMCs: A First-Principle Study

Effect of alloying elements (Ni, Co, Cr, and Sn) on the mechanical properties of W–Cu alloy system predicted from first principles

Investigation of the Influence of Alloy Atomic Doping on the Properties of Cu-Sn Alloys Based on First Principles

Effects of Different Phases, Compositional Change, and Doping on Ductility Improvement of NbAl3 Phases

The Effect of Nb Doping on the Properties of Ti-Al Intermetallic Compounds Using First-Principles Calculations

A First Principles Investigation on the Influence of Transition-Metal Elements on the Structural, Mechanical, and Anisotropic Properties of CaM2Al20 Intermetallics.

Influence of metal element doping on the mechanical properties of TiAl alloy

First-principles Study of the Properties of Al,Zn, Cu and Cd Doped B2-MgLi Alloys

Tailoring the mechanical properties of Al4Ca intermetallic by doping M (M = Cu, Zn, Mg, Fe and Mn) from DFT calculations

EFFECTS OF 4D TRANSITION METALS ON NIAL BONDS CHARACTERS FROM FIRST PRINCIPLES

Theoretics-Directed Effect of Copper or Aluminum Content on the Ductility Characteristics of Al-Based (al3ti, Alti, Alcu, Alticu2) Intermetallic Compounds